LCD Disection (Caps List by Model)

[PedroDaGr8]

I thought that maybe listing some of the information about what is inside of certain displays will help people recognize what is inside and what couple be problematic. I am including the the three main parts where cap failure can occur (PSU, Backlight Inverter and Video Input Board). Maybe if there is enough interest then a mod or someone can turn this into a sticky where everyone lists the details of their monitors, revisions etc. I opened it to make sure all of the caps were ok before I sold it, I didn't want a cap that has already gone bad but wasn't causing problems to be a problem later. Since it was still working I am not going to replace any of the caps, just don't want to break it, plus I need the money for knee surgery.

So here we go, for my first one.
Mfr: Viewsonic
M/N: VP171b

PSU:
Li-Shin AREX 94V-0
2 Panasonic 16V 1000uF 105oC HFA
1 Panasonic (unknown value because epoxy covered that side, but it is about 1inhc in round, and what I can see says Ce GH)
1 Rubycon XYG 50V 22uF

Backlight Inverter:
Emax 44.61101.001
2 HERMEI 25V 100uF
1 SSA 50V 2.2uF (M)P1 CE 105oC
4 3kV 22J Ceramic caps
2 250V PMS124J Ceramic Caps

Video Board:
Coretronic Corp
Genesis gm5120 chip
13 Taicon 16V 180uF 0304(M) 105oC (VT)
2 Taicon 10V 1000uF 0304(M) 105oC (HF)
2 Taicon 25V 10uF 0302(M) 105oC (PW)
1 Taicon 16V 2200uF 0238(M) 105oC (PW)
1 Taicon 16V 470uF 0246(M) 105oC (VZ)

Mods: If this does end up becoming a useful list, feel free to edit my above post to remove parts and/or change the title as you see fit.