Re: Samsung 2493 HM issue
First of all, thank you very much for the explanation on the resistors, and the more I look at my 487 ohm resistor, the more I see an 4R7 ! So this one seems to be good !
I measured the resistance between the circled components, I labelled them from the lower left corner 1, then clockwise 2 is the to pin, 3 is the right one.
For the component circled at the top of the picture, I've found:
between pins 1 and 2: 21300 ohms
between pins 1 and 3: 4 ohms
between pins 2 and 3: 21300 ohms
For the component just under the first one
between pins 1 and 2: no reading (1 on the left of my DMM screen)
between pins 1 and 3: 9960 ohms
between pins 2 and 3: no reading (1 on the left of my DMM screen)
Unfortunately I don't see any letter on these components, however I don't have a magnifier :-(
First of all, thank you very much for the explanation on the resistors, and the more I look at my 487 ohm resistor, the more I see an 4R7 ! So this one seems to be good !
I measured the resistance between the circled components, I labelled them from the lower left corner 1, then clockwise 2 is the to pin, 3 is the right one.
For the component circled at the top of the picture, I've found:
between pins 1 and 2: 21300 ohms
between pins 1 and 3: 4 ohms
between pins 2 and 3: 21300 ohms
For the component just under the first one
between pins 1 and 2: no reading (1 on the left of my DMM screen)
between pins 1 and 3: 9960 ohms
between pins 2 and 3: no reading (1 on the left of my DMM screen)
Unfortunately I don't see any letter on these components, however I don't have a magnifier :-(
Comment