Acer al1916W / DAC-19M005

Collapse
X
 
  • Time
  • Show
Clear All
new posts

  • jsog
    replied
    Re: Acer al1916W / DAC-19M005

    Don't forget the startup cap, probably a 47uf 50V in 5x11mm size. Probably only available in FC.

    Leave a comment:


  • bruferrit
    replied
    Re: Acer al1916W / DAC-19M005

    Thank you I will look into the FM's and see what I can get, if they are better.

    Leave a comment:


  • alexanna
    replied
    Re: Acer al1916W / DAC-19M005

    I only see one issue and it probably will be OK, You may have to tilt or lay them on their side.
    The EEU-FC1E102 25V 1000 UF caps you chose are 12.5mm x 20mm not 10mm x 20mm
    I haven't looked recently but the 10mm x20 mm low ESR are difficult to find.

    Leave a comment:


  • jsog
    replied
    Re: Acer al1916W / DAC-19M005

    Panasonic FC are decent low-ESR capacitors. FM and FR are better, with lower ESR, higher ripple, and sometimes rated for longer life. FM is often cheaper than FC.

    Leave a comment:


  • Oerg866
    replied
    Re: Acer al1916W / DAC-19M005

    Well, replace them :P

    Leave a comment:


  • bruferrit
    replied
    Re: Acer al1916W / DAC-19M005

    Can anyone give me advise on this?

    Leave a comment:


  • bruferrit
    started a topic Acer al1916W / DAC-19M005

    Acer al1916W / DAC-19M005

    OK have taken apart a Acer LCD that turns on but no picture for over 10 min and then wil come on (getting longer every time). There are some bulged caps and one leaking abit.

    I am going to recap it with these caps:

    (3) 35v 220uf - EEU-FC1V221L (8mm x 15mm)
    (2) 25v 1000uf - EEU-FC1E102 (10mm x 20mm)
    (1) 10v 1000uf - EEU-FC1A102 (10mm x 16mm)
    (1) 10v 2200uf - EEU-FC1A222 (12.5mm x 20mm)

    Can anyone say if this is a good choice in Caps.

    Thanks Bruce

Related Topics

Collapse

Working...