Hello to all,
I'm working on the above monitor, and everything is working relatively well, except that I get a slight (difficult to notice) ripple across the screen every 3 or 4 seconds. It's not the inverter, because I have a spare inverter and A/D board for this model, and after chaning the A/D board, the ripple was gone.
Could this be the scalar xtal oscillator? I don't have a scope, so I can't measure the output.
Thanks!
I'm working on the above monitor, and everything is working relatively well, except that I get a slight (difficult to notice) ripple across the screen every 3 or 4 seconds. It's not the inverter, because I have a spare inverter and A/D board for this model, and after chaning the A/D board, the ripple was gone.
Could this be the scalar xtal oscillator? I don't have a scope, so I can't measure the output.
Thanks!
Comment