Re: Sun 24.1" LCD monitor (Samsung LTM240M2 L02 panel)
From your photo, pins 7 and 8 of the Z1010A are connected together and are connected to one end of the coil (the plastic rod with copper wire wound around it). Measure the voltage at the other end of this coil.
Secondly, measure the voltage at the 8-pin connector of the power board for the on/off pin. Measure once before you push the on/off button and once after you've pushed the button. It will be good if you can have your positive probe connected at all times while you press the on/off button.
From your photo, pins 7 and 8 of the Z1010A are connected together and are connected to one end of the coil (the plastic rod with copper wire wound around it). Measure the voltage at the other end of this coil.
Secondly, measure the voltage at the 8-pin connector of the power board for the on/off pin. Measure once before you push the on/off button and once after you've pushed the button. It will be good if you can have your positive probe connected at all times while you press the on/off button.
Comment