hi, i am looking for the wiring diagram of this amplifier
-
hello everyone, I'm looking for the wiring diagram of this led monitor.
the model is DHI-LM19-L200, but I think that any other diagram of a DAHUA monitor could be equivalent.
I really hope that among you someone can help me to repair this monitor, the screen is black, it doesn't seem like a backlight problem.
I see the presence of 12 volts, 5 volts, but without a diagram the repair is very difficult.
thanks to those who will answer12-10-2024, 04:37 PM -
-
Hello guys
Because the unit is old (but only occasionally used) the loudness button causes some noise due to bad contact,
sprays did not work, so i decided to solder the pins that it connects on the pcb at the on (loudness on) position
i did that and it worked fine, i know from the bottom of my heart that the switch connects 2 pins and also d/c other 2 pins
on every position it have (6 pin switch), so i was curious what would happen if i clicked the switch off while the pins are soldered at on (so basiclly on and off at the same time), when i did so the sound is gone, nothing... -
please i need shematics of electrical wiring diagram for electrofusion welding machine elofit nupigeco , thank u .06-26-2022, 06:29 AM -
Hi All,
I obtained a schematic diagram for the above mixer but I am wondering if a block diagram exists as I am trying to fix a problem in the protection circuit which I find a little confusing using a circuit diagram only. In the good old days the workshop manuals always had a block diagram with a circuit discription. Very useful for fault finding.
The protection light is perminently on. The right sode has a -80DC on the feed to the speaker, hence the protection led on. I have removed all the O/P transistors which checked out OK. I tested all other transistors in circuit which seem...