Akai am-u03 integrated amplifier

Collapse
X
Collapse
 
  • Page of 1
  • Time
  • Show
Clear All
new posts
Previous template Next
  • GEARELECTRONICS
    Member
    • Apr 2019
    • 13
    • seychelles
    #1

    Akai am-u03 integrated amplifier

    Amp has both output IC STK0040ii blown and removed.
    Can I use this amp as a preamp with out the STKs and if I do will this cause any problems.

    your kind answer will be very much appreciated

    Thanks in advance
    Tags: None
    • petehall347
      Badcaps Legend
      • Jan 2015
      • 4426
      • United Kingdom
      #2
      Re: Akai am-u03 integrated amplifier

      shouldn't be any problem so long as there are no other problems

        Comment

        • GEARELECTRONICS
          Member
          • Apr 2019
          • 13
          • seychelles
          #3
          Re: Akai am-u03 integrated amplifier

          Petehall347 thanks for your reply i appreciate

            Comment

            Previous template Next

            Related Topics

            Collapse
            • Sik_6ty_Sixx
              HH Scott Model A510 Stereo Integrated Amplifier/ Graphic EQ - Blowing fuses in the LEFT speaker channel only. Any Help???
              by Sik_6ty_Sixx
              So like the title says, I have an old Stereo Receiver/Amplifier that I picked up from the goodwill, it's a HH Scott Model A510. When I first got it home it had zero output. Opened it up, notice the fuses are missing. Pop in 2 new fuses (AGC4A 250V) and try again, within 5 seconds the L channel fuse POP! I don't see any visible indications of damage or arc burns on the PCB, no popped resistors or diodes, no burnt traces or blown out caps. So I decide to just try another new fuse, POP. Swapped around my R and L speaker wires, and checked the integrity of all wires and connections. Everything looks...
              5 Photos
              02-18-2025, 05:06 AM
            • rooprob
              a rare beast: The Scotland-made Ariston Integrated Amplifier.
              by rooprob
              Hi there

              Total noob here.
              I have been hanging on to learn more about diagnosing and fixing amps, and watching a lot of youtube.

              This one is the Ariston Integrated Amplifier. There's no model number.
              I didn't find many references online: https://www.worthpoint.com/worthoped...made-174132328.

              I've owned this one for about 15 years. It was working fine, and was put away for a long time. Today the sound can be described as crunchy. You can clearly hear music, but it's very clipped and distorted.

              When...
              04-27-2023, 04:17 AM
            • jinu_j
              How to test Subwoofer Amplifier with only a multimeter
              by jinu_j
              Hi Folks

              Need some advice on how to test a subwoofer amplifier if i have access to only a multimeter.

              Problem
              I have a Boston Acoustics active Subwoofer (soundware S). Its rated output is 200W. But the output i am getting is very low i can barely hear/feel it even if put the gain at max. I replaced all the capacitors in the Subwoofer amplifier but still no change.

              Is there anyway to test this without getting an oscilloscope/Function generator to see if the fault is with amplifier, driver or the source??

              Any advice would be appreciated...
              08-29-2024, 02:05 AM
            • UserXP
              Mackie CR4 amplifier no sound
              by UserXP
              Hi, people.

              I've got an amplifier assembly from Mackie CR4 parts. It's just an amplifier, there was no speaker housing, so I used my set of CR4s to test it.

              Anyway, upon connecting everything and hooking the "new" amplifier to an audio source, the sound played clearly and strongly for the first ten seconds. I was happy it was working. Then the sound started to fade out during the playback until it was no more. After it had "dropped to zero", there were two very short intervals of sound playing at the normal volume, as if the amplifier was trying to...
              10-17-2020, 05:06 PM
            • waspie
              Aiwa GX-770 Amplifier Protection Circuit
              by waspie
              I am by no means an expert on this type of troubleshooting but I can follow direction real well.

              I'm no stranger to using a meter and soldering iron so I'm looking for some help in fixing an old amplifier/system I got. This is part of a system "V-1200" by Aiwa where there are several components. My first problem seems to be the amplifier.

              It seems to be in protection. When first turned on I hear the inital relay coming on but never the second relay which is connected to the protection IC. I don't see any obvious bad components on the board. If I ground the...
              11-29-2022, 09:58 AM
            • Loading...
            • No more items.
            Working...