I have this Denon RCD-M40 with protection mode: power ON always! I cannot reset and I can't use the system by any means! Anyone has a fix? There was line voltage fluctuations for the past couple of days and is now fixed. The receiver was working fine even after that on reset but now this error again and stays ON all the time, right away on plugging the power cord.
Denon RCD-M40 "Protection Mode: Power", couldn't reset.
Collapse
X
-
Denon RCD-M40 "Protection Mode: Power", couldn't reset.
Last edited by JidhinGeorge; 11-21-2020, 12:25 AM.Tags: None -
Re: Denon RCD-M40 "Protection Mode: Power", couldn't reset.
I don't know your experience level but based on the limited description of the fault symptoms and the fact the receiver appears to intermittently work, I would check the voltages on the supply rails while testing for dry joints (flexing the PCB). You may be able to reproduce the fault at will and identify the area that needs attention.
If you can obtain the service manual or at leas the schematic it would be useful.Last edited by 3Phase615V; 11-26-2020, 12:02 PM. -
Re: Denon RCD-M40 "Protection Mode: Power", couldn't reset.
Thanks for replying, I have the service manual and I did a solder reflow yesterday to all the individual PCBs after taking apart each boards and the fault cleared, worked for a day. But on turning the power ON today it went bad again. Same fault. Attached service manual to the post here.
Thank you.Attached FilesComment
-
Re: Denon RCD-M40 "Protection Mode: Power", couldn't reset.
Is this could be a weak capacitor, the culprit? I have this feeling since it worked fine for several hours and then I removed the main power overnight and plugged in the next day to see the error again!Comment
-
-
Re: Denon RCD-M40 "Protection Mode: Power", couldn't reset.
I suspect that too, so where to start with? Any suggestions?Comment
Related Topics
Collapse
-
Vizio e601i-A3 - Has Sound and Display, But No Backlight - Bad Power Supply Board or Bad LED Bulbs ?by Tynan DillI was given this TV from my great uncle. He said it just wouldn't turn on one day out of nowhere, replaced the TV, and gave it to me to possibly fix and use for myself.
Upon bringing it home and plugging it up, it showed a standby light.
I powered it on and without a flashlight, the display showed the "V" but the lighting is very dim, but visible.
The screen seems to blackout and stay black, but with a flashlight I can see the display.
With my Playstation 4 connected via HDMI, and running a game I can hear sound.
Assuming...7 Photos -
by PantherDaveHi all!
I'm trying to troubleshoot a Microsoft Surface Pro (5th gen) model 1796 that won't power on. Motherboard model is M1007506-015. My priority is retrieving data, but the SSD is integrated so it looks like if I can't repair it it'll need to go to a data recovery company. I've done a little basic board repair before, but nothing this advanced until now. So please forgive my ignorance in advance. 😅
I found the boardview for this laptop in the forums here, and am able to open it on my PC with FlexBV.
https://www.badcaps.net/forum/troubl...-hardware-devi... -
Hi!
I have a weird one for you. I have a H87-Pro4 from Asrock that power cycles. But only when you do a restart after it was already running!
Symptoms in detail:- I switch off the ATX PSU for ~15-20 seconds, then switch it back on again.
- I press power button. The board boots without issues.
- I can shut down the board any way I want (via OS* menu, or pushing the power button - either in the OS or the boot manager).
- Push power button again, board boots fine.
- This shutdown/powerup can be repeated multiple times without problems.
- BUT: If I do a restart instead
-
by sam_sam_samI have wanting to do this project for quite sometime now and I finally found a switching power supply that will work on this desoldering gun station ZD-915 that the original switching power supply took a shit and just was not worth trying to fix it because this switching power is not quite big enough to handle the heater element and the vacuum pump
One note when I tested the switching power supply and the voltage control board I noticed that this desoldering gun heat up much faster than the original switching power supply which I was really surprised by to the point that I might buy... -
This specification for the HP Pavilion Power Pavilion Power 15-cb009nl Notebook can be useful for upgrading or repairing a laptop that is not working. As a community we are working through our specifications to add valuable data like the Pavilion Power 15-cb009nl boardview and Pavilion Power 15-cb009nl schematic. Our users have donated over 1 million documents which are being added to the site. This page will be updated soon with additional information. Alternatively you can request additional help from our users directly on the relevant badcaps forum. Please note that we offer no warranties that...09-06-2024, 05:59 AM
- Loading...
- No more items.
Comment