Vizio Sound Bar No Power Pls help
Collapse
X
-
Re: Vizio Sound Bar No Power Pls help
Ok I opend the whole thing to take better picsLast edited by Mr.Nientiendo; 09-25-2019, 03:03 AM. -
Re: Vizio Sound Bar No Power Pls help
Cannot help with very poor quality pictures. I cannot read anything on the main board except the P/N of the board..Last edited by budm; 09-25-2019, 09:41 AM.Never stop learning
Basic LCD TV and Monitor troubleshooting guides.
http://www.badcaps.net/forum/showthr...956#post305956
Voltage Regulator (LDO) testing:
http://www.badcaps.net/forum/showthr...999#post300999
Inverter testing using old CFL:
http://www.badcaps.net/forum/showthr...er+testing+cfl
Tear down pictures : Hit the ">" Show Albums and stories" on the left side
http://s807.photobucket.com/user/budm/library/
TV Factory reset codes listing:
http://www.badcaps.net/forum/showthread.php?t=24809Comment
-
-
Re: Vizio Sound Bar No Power Pls help
Hi posted some better pictures could it be my power switch is broken since I'm receiving voltage on the power board also how many volts should I be getting on the other board? not the power boardComment
-
Re: Vizio Sound Bar No Power Pls help
Better pics of my power board cause I still believe the Issue of not powering on is on tht boardComment
-
Re: Vizio Sound Bar No Power Pls help
If you know which conductors bring power TO the board, look at the voltage rating of the caps that it encounters, there. The supplied voltage will not exceed the WVDC ratings of those caps (and will typically be at least ~40% less).Last edited by Curious.George; 09-26-2019, 02:44 PM.Comment
-
Re: Vizio Sound Bar No Power Pls help
Hi and thank you for replying any help to get thru this would help ok so my knowledge with electricity is beetween the middle of beginner knows a lil more then average Joe so take make it easier I don't understand wht u mean by WVDC ratings of those caps are u saying to check each cap individually? to see wht power they should be getting on cold side those caps I'm getting 24v on the hot side the big cap is 15v I can't tell it jumps like fluxiates also should I check the other big board on the right side but since it don't power on I'm assuming it has to do with the power boardLast edited by Mr.Nientiendo; 09-26-2019, 05:21 PM.Comment
Related Topics
Collapse
-
Vizio e601i-A3 - Has Sound and Display, But No Backlight - Bad Power Supply Board or Bad LED Bulbs ?by Tynan DillI was given this TV from my great uncle. He said it just wouldn't turn on one day out of nowhere, replaced the TV, and gave it to me to possibly fix and use for myself.
Upon bringing it home and plugging it up, it showed a standby light.
I powered it on and without a flashlight, the display showed the "V" but the lighting is very dim, but visible.
The screen seems to blackout and stay black, but with a flashlight I can see the display.
With my Playstation 4 connected via HDMI, and running a game I can hear sound.
Assuming...7 Photos -
by GLISITHi all,
TL;DR - this laptop is driving me nuts with the oddball power-related behaviors. Appreciate any insight you can provide!
I'm experiencing a power issue on an Asus Probook P5440UF-XB74. Although I've worked with electronics and computers for decades, this is my first attempt at getting into motherboard-level component troubleshooting. Any help the community can provide is greatly appreciated!
A few weeks ago I was using the laptop (on battery power) for a Zoom meeting. The battery was running very low (long meeting) but I wasn't worried about... -
by sam_sam_samI have wanting to do this project for quite sometime now and I finally found a switching power supply that will work on this desoldering gun station ZD-915 that the original switching power supply took a shit and just was not worth trying to fix it because this switching power is not quite big enough to handle the heater element and the vacuum pump
One note when I tested the switching power supply and the voltage control board I noticed that this desoldering gun heat up much faster than the original switching power supply which I was really surprised by to the point that I might buy... -
This specification for the HP Pavilion Power Pavilion Power 15-cb009nl Notebook can be useful for upgrading or repairing a laptop that is not working. As a community we are working through our specifications to add valuable data like the Pavilion Power 15-cb009nl boardview and Pavilion Power 15-cb009nl schematic. Our users have donated over 1 million documents which are being added to the site. This page will be updated soon with additional information. Alternatively you can request additional help from our users directly on the relevant badcaps forum. Please note that we offer no warranties that...09-06-2024, 05:59 AM
-
by meraklinetxHello, I have an asus Z97-A motherboard and it doesn't start which was working properly before, the problem isn't related by ram, ram slots or psu (I changed all and nothing work), the exact problem is when you switch it on , it starts and after 1 seconds (no boot or display picture) it's off and then on cycle continuously until you power it off from psu also it's responding to the power switch for turning it off if you keep pressing it 3 or 4 seconds (power button pin has 3.3v) , also when you start it with eatx 12v socket connected this is happening (power cycle also all voltages are resetting...
- Loading...
- No more items.
Comment