Anybody has an Onkyo TX-RZ800 Micom?

Collapse
X
Collapse
 
  • Page of 1
  • Time
  • Show
Clear All
new posts
Previous template Next
  • tibimakai
    Badcaps Legend
    • Jan 2012
    • 3680
    • USA
    #1

    Anybody has an Onkyo TX-RZ800 Micom?

    As the title shows, I'm in need of a Micom(Q7009), or the dump file from it.
    My receiver's Micom got shorted.
    I have tried with a TX-NR838 Micom, but it won't turn completely on. It just turns on for two seconds, and than shuts off.
    TJmotter from avsforum is helping me, but we are stuck.
    Any help would be appreciated.
    Tags: None
    Previous template Next

    Related Topics

    Collapse
    • Yanleb
      LG 42LV5400-UB doesn't power up, Micom issue
      by Yanleb
      Hi all,

      This repair is very challenging. I already made my way to the problem. Please read the complete post before commenting. I need the help from good gurus.

      The power button on the TV set is working, the same for the power button on the remote control. When activated the power LED changes from red to white and the power supply relay clicks. But no image appears, and no sound is heard.

      I already investigated the problem. the Micom chip on the EBR73110104/EBT61520408 main board is the issue. The Micom is IC602 that use the μPD78F0514 (UPD78F0514)...
      01-03-2022, 10:52 PM
    • TJ65
      Samsung Galaxy Tabpro S BIOS and Micom Version doesn't match
      by TJ65
      Hello everyone,
      i made out of two broken Samsung Galaxy Tabpro S one that works partially.
      The one Mainboard had a broken screen output but working hdmi (usb c adapter) output and the other didnt start at all.
      I switch the bios chips and now the tablet starts but very very slow and it takes some trys to get it starting.
      The problem is, that the micom Version doesn't match with the bios version, see picture.
      How can i update the Micom Version? The Samsung bios update wont work.
      With https://github.com/tavinus/SamsungBIOSTools i could extract the newest bios update...
      01-09-2025, 01:35 PM
    • CDNBrewer
      Running out of Ideas, hoping someone smart can provide some for my ONKYO TX-SR353 Receiver
      by CDNBrewer
      Hello Everyone,

      I have an Onkyo TX-SR353 Audio/Video Receiver (5.1 ch with HDMI) that I am having a really hard time diagnosing and I'm about to throw this in the junk and go buy a new unit that is on sale until the 7th.

      Symptoms:
      • Intermittent (part of the reason why i'm having a hard time isolating problem), sometimes will work for 10+h at a time without issue
      • Original symptom was wife reported loud banging noise (like someone was banging on the wall with their fists) from the LEFT SURROUND speaker and then the unit shut off.
      • I swapped the Left and Right surround
      ...
      08-05-2025, 09:29 PM
    • FrancescoV
      Onkyo HT-R390 no sound output, video output ok
      by FrancescoV
      Good morning everyone,
      I'm trying to repair an onkyo ht-r390 that has no sound output, despite the volume being at maximum, the rest seems to work; the video output signal (coming from an hdmi input) is present, but the audio is absent. Similar situation if I send an audio signal from any input I have no output.

      The firmware reported is the following:
      M:1.00/11107BLP
      D:?.??/????????
      O:1.00/11107AL

      The DSP firmware given the question marks seems corrupt.

      On the BCHDM-0678 - 25140678 - QPWBCHDM0678A0 board the chip that usually seems...
      05-11-2025, 02:59 AM
    • jesterace
      Samsung B2030HD IR Remote Receiver Dead, shorted micom?
      by jesterace
      Hi,
      I have this TV a small 20 inch that works perfectly except for the IR has stopped. I have confirmed that the remote control is fine and tried an alternative and even tried with IR blaster from phone. Remote 100% ok.

      Tried installing latest firmware but no change.

      TV won't respond to remote at all, not even to bring it out of standby. I have to use the touch sensitive front panel to operate, at which point TV is usable albeit with no remote.

      Tried replacing the IR receiver diode/bulb on front panel and no change so put the old one back. After tracing...
      10-26-2022, 02:20 AM
    • Loading...
    • No more items.
    Working...