Denon AVR-2700H audio stops while receiver still works

Collapse
This topic has been answered.
X
X
 
  • Time
  • Show
Clear All
new posts
  • Cornito
    Senior Member
    • Jan 2024
    • 93
    • France

    #1

    Denon AVR-2700H audio stops while receiver still works

    Hello team,

    I've got a new issue with a Denon Avr-2700H.
    After several minutes working, receiver stops playing sound with a poc eared in the speakers.
    Receiver still work and display video with error message on display.
    Seems to me that is the main output relay.

    I'm looking for the service manual that I can't find for the moment.

    Does somebody have it?

    Regards
  • Answer selected by Cornito at 08-03-2025, 12:03 PM.
    lotas
    Badcaps Legend
    • Jan 2016
    • 4599
    • Russia

    Originally posted by Cornito
    Yep you're right I miss the X 😉
    Here you go.
    Attached Files

    Comment

    • lotas
      Badcaps Legend
      • Jan 2016
      • 4599
      • Russia

      #2
      Maybe Denon AVR-X2700H after all?

      Comment

      • Cornito
        Senior Member
        • Jan 2024
        • 93
        • France

        #3
        Yep you're right I miss the X 😉

        Comment

        • lotas
          Badcaps Legend
          • Jan 2016
          • 4599
          • Russia

          #4
          Originally posted by Cornito
          Yep you're right I miss the X 😉
          Here you go.
          Attached Files

          Comment

          • Cornito
            Senior Member
            • Jan 2024
            • 93
            • France

            #5
            Thank you very much
            How did you find it?

            Regards

            Comment

            Related Topics

            Collapse

            • basskilla
              Denon PMA 350SE receiver missing part,need help for rewiring.
              by basskilla
              Hi Friends!



              I have a Denon PMA 350SE receiver,the remote controller-sensor pcb panel is missing from inside and without this it not even powering on by the main switch.
              So there are two connector left one 8 pin and one 3 pin.

              Would be Someone so kind and tell me which pin should connet to where,to make it work?

              I attached the service manual and pictures from the connectors.

              Thank You for the answer,and best wishes!...
              08-14-2023, 02:59 AM
            • ajvpb
              Denon AVR-S900W receiver repair struggles
              by ajvpb
              I picked up a Denon AVR-S900W with no power. Eventually I found a shorted 5339 3.3v regulator chip/ic on the hdmi board. I replaced that and was able to power on the receiver but it behaved oddly. Some of the buttons on the front wouldn't work, the volume knob wouldn't work and it didn't output any hdmi signal. I thought I may have soldered the new chip on wrong so I took it off and did some searching around. Apologies for the lack of zoom to see things more clearly.

              Service manual, on the page in question:
              https://www.manualslib.com/manual/95...100w.html?page...
              11-10-2020, 01:55 PM
            • CDNBrewer
              Running out of Ideas, hoping someone smart can provide some for my ONKYO TX-SR353 Receiver
              by CDNBrewer
              Hello Everyone,

              I have an Onkyo TX-SR353 Audio/Video Receiver (5.1 ch with HDMI) that I am having a really hard time diagnosing and I'm about to throw this in the junk and go buy a new unit that is on sale until the 7th.

              Symptoms:
              • Intermittent (part of the reason why i'm having a hard time isolating problem), sometimes will work for 10+h at a time without issue
              • Original symptom was wife reported loud banging noise (like someone was banging on the wall with their fists) from the LEFT SURROUND speaker and then the unit shut off.
              • I swapped the Left and Right surround
              ...
              Yesterday, 09:29 PM
            • wolf1976
              wireless receiver for 6 speeds fan control with remote control
              by wolf1976
              hi i have a receiver that is destroyed from the overvoltage i guess
              my question is has three wires u v w for driving a motor fan i found an other receiver wireless from aliexpresss with the same propertiew but for dc motor
              the motor fan has not label
              i have an other receiver operational
              In your opinion can i measure the voltage at the output ?
              what do you suggest me with a simple instrument multimeter or using someone instrument more specific ?
              thanks in advance...
              07-23-2025, 03:12 PM
            • CdDvdFlash
              DSE GE6878 possible TV receiver dying remote not working well
              by CdDvdFlash
              For this Dick Smith TV GE6878 (Thompson) I replaced the broken remote with a universal it kinda works though if its more than a few meters away sometimes the buttons register and sometimes they wont so I bought another remote from another brand and it has the same problem, I've had an old TV in the past that the sensor died completely and I replaced it to fix it could this be a similar problem? I tried looking for a service manual, spare parts for a receiver and a parts list but I couldnt find any info. can someone please help me to find the info online for a service manual or where I can buy...
              07-03-2024, 03:55 AM
            • Loading...
            • No more items.
            Working...