Announcement

Collapse
No announcement yet.

Denon AVR-X2000 no sound

Collapse
X
 
  • Filter
  • Time
  • Show
Clear All
new posts

    Denon AVR-X2000 no sound

    Good day all

    My first post on the forum, tried to find a introduction page, but couldnt. So thank you for having me here.

    After spending most of the past 2 days Googling and watching Youtube videos, I came across the forum, in the hopes that I could get some assistance with the above mentioned amplifier. As I do most days, I switched the unit on yesterday morning, got the relay clicks as per normal, but no sound from any of the speakers. Tried "Audio Direct' and the same issues there. In a panic state, I did a factory reset, without any luck. Then disconnected all speakers, performed another reset and still no sound. What I did notice is, that the menu system seems a bit sluggish when it comes to responsiveness.Im fairly competent with a MM and can read a schematic....(he said smiling) After watching a video done in Tamul on Youtube, I managed to get to test some of the regulators shown in the video. And no...I dont understand a word of Tamul. I would, by the mercy of the pro's onsite here, be greatfull if someone would be willing to take the time to guide me through a diagnosing process.
    Thanx in advance to all























Working...
X