Reducing Hiss in an Ampeg SVP-Pro Bass Preamp

Collapse
X
 
  • Time
  • Show
Clear All
new posts
  • bgavin
    Badcaps Legend
    • Jan 2007
    • 1355

    #1

    Reducing Hiss in an Ampeg SVP-Pro Bass Preamp

    I have recently acquired an SVP-Pro preamp for my electric bass rig. The SVP-Pro is notorious for hiss, which isn't solved by tube swapping.

    Question: I've been told that a resistor replacement with premium components will reduce hiss. T/F?

    Now that I have successfully recapped motherboards, I figure I'm up for a recap and/or resistor replacement on my SVP-Pro. I have the schematic for both the tube board and the preamp itself.

    Link to Ampeg Directory

    What say the gurus?
  • Maxxarcade
    Badcaps Veteran
    • Jul 2006
    • 973

    #2
    Re: Reducing Hiss in an Ampeg SVP-Pro Bass Preamp

    I have also heard that the older carbon resistors in many tube amps are noisey and drift with temperature. If I remember right, replacing them with metal film resistors helps a bit. KC8 might be of more help than me though

    I recapped an old Philco tube radio a while back, and I had a hard time with the point to point wiring, being so used to printed circuit boards. I have much respect for the people who used to build and service tube equipment.
    Last edited by Maxxarcade; 07-15-2007, 05:47 PM.

    Comment

    • Logistics
      Badcaps Veteran
      • Apr 2007
      • 721
      • USA

      #3
      Re: Reducing Hiss in an Ampeg SVP-Pro Bass Preamp

      Do you hear hiss if there is no source hooked up to the amp and just turn the volume up while outputting nothing?
      Presonus Audiobox USB, Schiit Magni 3, Sony MDR-V700

      Comment

      • bgavin
        Badcaps Legend
        • Jan 2007
        • 1355

        #4
        Re: Reducing Hiss in an Ampeg SVP-Pro Bass Preamp

        This model preamp has universal complaints about hiss. Some reduce hiss by judicious replacment of tubes. JJ in this socket, Sovtek in that socket, etc.

        I'm not an amp tech, but tube swapping tells me the bug is deeper in the circuit. Somebody told me about cheap resistors being a culprit, so I figured to ask here.

        The way I understand it, the hiss is quite audible while idling without an instrument plugged in. I just acquired mine, and have yet to test it. Too many other projects are on the front burner at this time.

        Comment

        • Logistics
          Badcaps Veteran
          • Apr 2007
          • 721
          • USA

          #5
          Re: Reducing Hiss in an Ampeg SVP-Pro Bass Preamp

          Sometimes hiss is caused by the Gain being too high. Maybe those amps have a high amount.
          Presonus Audiobox USB, Schiit Magni 3, Sony MDR-V700

          Comment

          • bgavin
            Badcaps Legend
            • Jan 2007
            • 1355

            #6
            Re: Reducing Hiss in an Ampeg SVP-Pro Bass Preamp

            I have no smarts for tube circuits, which is why I tossed this out for consideration. I also posted it over on TalkBass.Com and only got a bit more interest.

            The preamp has been discontinued after LOUD bought out St.Louis Music, which is the parent of Ampeg. I figured if it was just cheap components, I could take my (minimal) recapping skills and do a recap or resistor replacement on the Ampeg.

            I found the Ampeg didn't use cheap parts at all. There is the possibility of a Nichicon HM equivalent (good maker, defective product), but I kinda doubt it. They use the Wima caps, etc, etc. Some smart guy took a look at the circuit and commented the DC supply could be better, etc. It might be obvious to a tube guru, but not to me.

            Comment

            Related Topics

            Collapse

            • DCJack
              B&K 707 tube tester. I need help.
              by DCJack
              Hi everyone!

              I managed to get my hands on a rough condition B&K 707 for "the best price" because it was not working. It's my first tube tester and I'm really wanting to get it up and running. I downloaded that manual that has the schematics and tested every resistor and capacitor and replaced the ones that failed. I replaced the missing 83 rectifier tube with a used but tested-good one. I also have a number 80 rectifier tube that I have used in tests before I found the 83 tube.

              Initially I noticed that I was not getting the red on-light to turn on, but it...
              03-05-2024, 05:05 PM
            • Schoenradt
              ECH81/6AJ8 Vacuum Tube Question
              by Schoenradt
              Recently I acquired an Eico HFT 92 AM/FM radio made back in 1958. The unit has had some decent modifications done such as replacing the rectifier tube with silicon diodes and replacing the main filter capacitor with electrolytic capacitors. When I powered it up FM wouldn't tune past 105Mhz. I checked the FM tuner front end assembly and found a capacitor not soldered to the coil from the Plate B+ to and ground on the other side of the coil. Some calibration was needed on the trimmer capacitor on the tuner. My question is AM is extremely weak. When I tap on the tube I get all kinds of snapping and...
              06-10-2021, 05:49 PM
            • eduaqa
              Amplifier - bad sound when loud sound on bass
              by eduaqa
              I'n trying to fix a M&S SYSTEM DMC-1which have following problem:
              I'm using FM station to do this fix, I works perfect if volume below around 8 or if bass is set to zero, the sound can go to 20 without problem, but if I set bass to maximum and try to go over 10 the sound comes distorted ... I saw a video on YouTube the person saying about the main capacitors on the power portion, but I disconnect the main transformer and inject direct to the capacitors PINs my bench power supply -23v 0v +23v, but still distorted so I think the problem is not the capacitor neither the transformer...
              08-06-2022, 11:28 AM
            • Zonzi
              Telefunken L70 speakers, one has a nasal sound with less bass
              by Zonzi
              Hi everyone !


              Once again I have an issue with old stuff I found for cheap, guess I have a taste for these.


              I bought these two Telefunken L70 speakers for 20€ (https://www.radiomuseum.org/r/telefu...r_box_l_2.html), and they are in a superb state, component-wise. The box is scratched but I couldn't care less, I'm interested by whether it works or not.

              They do work, and have a really nice sound, but one of the two has a problem with its 8" woofer. It's got practically no bass, and the mids are really pushed...
              05-31-2023, 12:34 PM
            • pfl
              The box pro - Achat 108 sub A troubleshooting
              by pfl
              Hello Everyone.

              The issue with this audio device was a very low bass level ; tracking the bass signal path on the preamp module i discovered a missing component (resistor R98) on the inverting input of op. amp U14 (allegedly active low pass filter) (see picture).
              I put a 1k resistor but now R/L passive speakers sound level is too low compared with bass level ; i guess resistor value is wrong

              Can someone tells me what's the correct value of R98 on preamp pcb
              or
              can someone provide me with schematics / service manual

              Thanks
              pierre...
              06-23-2025, 08:53 AM
            • Loading...
            • No more items.
            Working...