DSP dump BIN files for ONKYO TX-NR5009

zahi

New Member

Join Date: Sep 2022

Posts: 2

Country: IL
#1

DSP dump BIN files for ONKYO TX-NR5009

04-25-2025, 04:32 PM

Hello everyone, I need DSP dump BIN files for ONKYO TX-NR5009, TX-NR3009, Integra DTR-80.3, PR-SC5509, DHC-80.3, DTR-70.3, I think also 5007 is the same, or other...
I have replaced the DSP chip, still not working.
Can you share please?
Tags: None

Previous template Next

Onkyo HT-R390 DSP dump

by Tom_x

Hi

I need DSP dump for Onkyo HT-R390.
DSP board: BCHDM-0678
DSP firmware corrupted, i need dump for Q282 spi chip (25q16) or dump from similar model with same dsp board

thx
Tom
- Channel: Troubleshooting Audio Equipment
01-11-2025, 03:57 AM
Onkyo TX-NR5007 (NR3007 NR1007) NAND DUMP for DZKB4 DSP

by MotherTeresa

Hi.
I'm looking for a DSP NAND DUMP for the Onkyo TX-NR5007 that works with the DZKB4 chip. Can anyone help?
Regards.
- Channel: Troubleshooting Audio Equipment
09-20-2025, 12:09 PM
Onkyo grand integra schematic!

by Tom_x

Hi friends!

I'm looking for schematic diagram for Onkyo grand integra A-G10 (A-8890)

speaker relays not activated, maybe protection circuit blocking.
If i power on for a minute, and power off and on again, speaker relays activated and unit working.

thx
Tom
- Channel: Troubleshooting Audio Equipment
12-02-2023, 01:30 PM
Onkyo/Integra DBS-50.2 Blu-Ray Player - Won't turn on or shuts off immediately.

by Rolin

I have an Integra DBS-50.2 Blu-Ray Player that I haven't used in a while. Tried to turn on and it turned on for a brief moment with "hello" on the display then shuts off. Dead from that point on unless I unplug it and try again. Took it apart and checked a few well labeled voltages on the Power Supply board and found the 3.3V isn't measuring on the board (unless I'm misunderstanding what I'm measuring). I have a few pics of the board and schematics. There's a 4 PIN voltage regulator at location IC1301 with a part number 070XFC1 by Sharp that I believe should output 3.3V on PIN2,...
- Channel: Troubleshooting TVs and Video Sources
09-07-2024, 12:11 AM
ASUS ZenBook UX480F : need help with cleaning the ME region of my BIOS dump

by mkdj

Dear all,
I have a ASUS ZenBook UX480F with the following symptoms:

I suspect it is a BIOS issue. So I decided to try to clean the ME region. I followed the guide on win-raid, and I believe I have done everything correctly. My problem is: when I open the outimage.bin in ME Analyzer, it says that it is Extracted, and not Region, Extracted as it should be. Is it normal, or did I do something not correctly? This is my first experience editing BIOS files.

I would appreciate if someone could take time to explain the issue, so that I can learn. But I would...
- Channel: BIOS Requests ONLY!
10-19-2025, 04:41 AM
Loading...
No more items.

DSP dump BIN files for ONKYO TX-NR5009

DSP dump BIN files for ONKYO TX-NR5009

Related Topics