Onkyo grand integra schematic!

Collapse
X
Collapse
 
  • Page of 1
  • Time
  • Show
Clear All
new posts
Previous template Next
  • Tom_x
    Member
    • Aug 2018
    • 33
    • Hungary
    #1

    Onkyo grand integra schematic!

    Hi friends!

    I'm looking for schematic diagram for Onkyo grand integra A-G10 (A-8890)

    speaker relays not activated, maybe protection circuit blocking.
    If i power on for a minute, and power off and on again, speaker relays activated and unit working.

    thx
    Tom
    Tags: None
    Previous template Next

    Related Topics

    Collapse
    • Rolin
      Onkyo/Integra DBS-50.2 Blu-Ray Player - Won't turn on or shuts off immediately.
      by Rolin
      I have an Integra DBS-50.2 Blu-Ray Player that I haven't used in a while. Tried to turn on and it turned on for a brief moment with "hello" on the display then shuts off. Dead from that point on unless I unplug it and try again. Took it apart and checked a few well labeled voltages on the Power Supply board and found the 3.3V isn't measuring on the board (unless I'm misunderstanding what I'm measuring). I have a few pics of the board and schematics. There's a 4 PIN voltage regulator at location IC1301 with a part number 070XFC1 by Sharp that I believe should output 3.3V on PIN2,...
      09-07-2024, 12:11 AM
    • TinkerTron
      Schematic vs. Reality: Where Are the Resistors on My Sharp Clock Radio? Model FY-70CH
      by TinkerTron
      Hey everyone,

      I'm currently working on a mid-70s Sharp Electronic Digital Clock Radio, Model FY-70CH. I found the service manual online, printed it out, and have been studying it for a while. My main reasons for tackling this are: (1) I want to learn electronics and figured I'd start with something I had on hand, and (2) I want to fix its issues. Right now, the radio sounds awful, has about 5V DC at the speaker terminals, and the alarm time setting doesn't work. But I'm not asking how to fix these problems.

      Instead, here's what's been bugging me so far:
      The schematic...
      3 Photos
      03-06-2025, 02:03 PM
    • atunguyd
      Acer x163w Monitor PSU schematic
      by atunguyd
      Ii wonder if anyone can help me. I have a Acer x163w monitor which is not powering up. The PSU main capacitor's one leg had completly come off - I replaced it but the PSU is still not outputting DC. I found the monitor in questions service manual here on manuals lib but the schematic in there is a completely different - the schematic shows no mosfet to drive the transformer while the one I have does use a mosfet - also the schematic shows only one optocoupler but mine has two.
      The PSU board is labelled FM-20A02-AAA made by APD as per the image below. I am trying to find a schematic for this...
      03-05-2025, 02:08 PM
    • Sdhjm
      Schematic with element ratings hp victus 15 dag3pmb18b0 rev:b g3p
      by Sdhjm
      I'm asking if anyone has a schematic for the dag3pmb18b0 rev:b g3p board. I found a schematic of the board, but I don't have the component numbers. If anyone needs a schematic, I can send it to you, but I don't have the numbers....
      11-26-2025, 03:43 AM
    • Thetechdude
      MSI Ventus RTX 4080 16G Broadview schematic needed
      by Thetechdude
      Hi guys, I'm working on a MSI Ventus RTX 4080 16G. The GPU has 12v, 5v, however what I assume is the 1.8v rail has 1.1v and what I assume to be PEX is 0v. As you may have guessed already there is no Vmem and no Vcore.

      I have looked around in related forum posts for a schematic so Much appreciated if anyone can share a Broadview schematic.

      Thanks.
      07-15-2025, 11:15 AM
    • Loading...
    • No more items.
    Working...