Denon avr-1602 issue

Collapse
X
Collapse
 
  • Page of 1
  • Time
  • Show
Clear All
new posts
Previous template Next
  • gornati
    Member
    • Jan 2013
    • 27
    • Brazil
    #1

    Denon avr-1602 issue

    Hi all,

    The other day, i was using my denon receiver, notice a bad smell, shutted everything off.

    Later on, tried to turn on again, but i got no sound and no image thru HDMI, looks like HDMI IN was bad, because On Screen Display was working, volume control and setup menu was showing in the screen.

    Any ideas?
    Tags: None
    • ben7
      Capaholic
      • Jan 2011
      • 4059
      • USA
      #2
      Re: Denon avr-1602 issue

      Originally posted by gornati
      Hi all,

      The other day, i was using my denon receiver, notice a bad smell, shutted everything off.

      Later on, tried to turn on again, but i got no sound and no image thru HDMI, looks like HDMI IN was bad, because On Screen Display was working, volume control and setup menu was showing in the screen.

      Any ideas?
      Could also be a power supply issue. Do all the other functions work? Does the device that was sending the HDMI signal into the receiver still work???

      P.S. It would greatly help if you could get us some good, focused pictures
      Muh-soggy-knee

        Comment

        • gornati
          Member
          • Jan 2013
          • 27
          • Brazil
          #3
          Re: Denon avr-1602 issue

          well i didnt opened the receiver yet.
          and yes, the PS3, XBOX360 and CABLE TV are working fine.
          if i connect them directly in the TV, works fine.
          all functions looks like are working, TURNER (WITH NO SOUND), IPOD dock connector (no sound) recognizes ipod/iphone, search thru the music etc.
          speaker test works fine, WITH SOUND!!!

          what else, protection works (that clicking noise when you turn on and off the receiver).

            Comment

            • ben7
              Capaholic
              • Jan 2011
              • 4059
              • USA
              #4
              Re: Denon avr-1602 issue

              Originally posted by gornati
              well i didnt opened the receiver yet.
              and yes, the PS3, XBOX360 and CABLE TV are working fine.
              if i connect them directly in the TV, works fine.
              all functions looks like are working, TURNER (WITH NO SOUND), IPOD dock connector (no sound) recognizes ipod/iphone, search thru the music etc.
              speaker test works fine, WITH SOUND!!!

              what else, protection works (that clicking noise when you turn on and off the receiver).
              Well, sounds like the HDMI interface chip has gone poof. Only one thing to do - open it!
              Muh-soggy-knee

                Comment

                • gornati
                  Member
                  • Jan 2013
                  • 27
                  • Brazil
                  #5
                  Re: Denon avr-1602 issue

                  will do it tomorrow!
                  Today i just fixed my 50 inch plasma with helps from this forum!

                  Here is the video before:

                  http://www.youtube.com/watch?v=bBwp2-VcoP4

                  Here is the video after:

                  http://www.youtube.com/watch?v=e1Lf6x9HoQg

                    Comment

                    Previous template Next

                    Related Topics

                    Collapse
                    • basskilla
                      Denon PMA 350SE receiver missing part,need help for rewiring.
                      by basskilla
                      Hi Friends!



                      I have a Denon PMA 350SE receiver,the remote controller-sensor pcb panel is missing from inside and without this it not even powering on by the main switch.
                      So there are two connector left one 8 pin and one 3 pin.

                      Would be Someone so kind and tell me which pin should connet to where,to make it work?

                      I attached the service manual and pictures from the connectors.

                      Thank You for the answer,and best wishes!...
                      08-14-2023, 02:59 AM
                    • benspawn02
                      Anthem MRX500 - no sound. R2A15218FP issue??
                      by benspawn02
                      Anthem MRX500 - no sound

                      Dear Electronics Experts:

                      I have the following problem I am trying to troubleshoot. Unfortunately, I have contacted Anthem themselves and even a local distributer but I am not having much luck. Also, I have scoured the internet and unable to obtain a service manual. The Anthem service rep has also replied that he is unable to provide me with any service documentation. I have performed numerous searches on the internet and cross-referenced a few other AV receiver makers (Denon, Marantz, Onkyo) and found certain similarities to block diagram...
                      08-12-2023, 04:46 AM
                    • rounin
                      MacBook Air A2337 (820-02016) USB-C Port Issue – Only Works in One Orientation (CC Line Problem?)
                      by rounin
                      Hi everyone,

                      I'm working on a MacBook Air 2020 (A2337, board 820-02016) and running into a strange USB-C issue. I've gone through quite a bit of testing and part replacement, but I'm stuck — hoping someone here can shed some light.

                      🛠 Original Issue
                      The machine initially wouldn't negotiate 20V over USB-C — stuck at 5V.
                      Diagnosis showed PP1V5_UPC0_LDO_CORE shorted to ground.

                      I replaced U3100 (UF400) using a donor board (A2179), and the machine powers on fine now.

                      ⚠️ New Problem: One USB-C Port Only Works in One Orientation...
                      04-19-2025, 01:18 AM
                    • ugamazing
                      Three 820-01700 32GB Logic Boards Same Issue: Won't Wake From Hibernate
                      by ugamazing
                      I have three identical-spec 820-01700 boards (2.6/32/512), and ALL THREE boards came to us with the same fault, from different sources: The boards don't wake from hibernation with the keyboard or lid, they ONLY wake when you press the power button. I understand this is a very minor issue, but the boards must be fixed!

                      We will of course begin with the obvious (checking lid signals), but I couldn't help but notice these three boards were all 32GB variants. Has anyone noticed an issue relating to these 32GB boards in particular? I of course don't think it's a RAM issue, but it's bizarre...
                      12-17-2024, 07:05 PM
                    • Cornito
                      Denon AVR-2700H audio stops while receiver still works
                      by Cornito
                      Hello team,

                      I've got a new issue with a Denon Avr-2700H.
                      After several minutes working, receiver stops playing sound with a poc eared in the speakers.
                      Receiver still work and display video with error message on display.
                      Seems to me that is the main output relay.

                      I'm looking for the service manual that I can't find for the moment.

                      Does somebody have it?

                      Regards...
                      08-03-2025, 06:10 AM
                    • Loading...
                    • No more items.
                    Working...