Just thought i would share the symptom and fix in case someone has a similar problem.
Friend calls me and says his amp wont work, no lights or anything.
I open her up and there was 1 bulged cap on the voltage regulator board so i replaced that, still would not switch on.
I then reflowed all the solder joints on the regulator board, fitted it all back together and boom,, working again
Blue cap is the one i put in.
Sorry for pic quality RC.
Friend calls me and says his amp wont work, no lights or anything.
I open her up and there was 1 bulged cap on the voltage regulator board so i replaced that, still would not switch on.
I then reflowed all the solder joints on the regulator board, fitted it all back together and boom,, working again

Blue cap is the one i put in.
Sorry for pic quality RC.
Comment