Denon PMA 350SE receiver missing part,need help for rewiring.

Collapse
X
Collapse
 
  • Page of 1
  • Time
  • Show
Clear All
new posts
Previous template Next
  • basskilla
    Member
    • Mar 2014
    • 18
    • Hungary
    #1

    Denon PMA 350SE receiver missing part,need help for rewiring.

    Hi Friends!



    I have a Denon PMA 350SE receiver,the remote controller-sensor pcb panel is missing from inside and without this it not even powering on by the main switch.
    So there are two connector left one 8 pin and one 3 pin.

    Would be Someone so kind and tell me which pin should connet to where,to make it work?

    I attached the service manual and pictures from the connectors.

    Thank You for the answer,and best wishes!
    Attached Files
    Tags: None
    Previous template Next

    Related Topics

    Collapse
    • Cornito
      Denon AVR-2700H audio stops while receiver still works
      by Cornito
      Hello team,

      I've got a new issue with a Denon Avr-2700H.
      After several minutes working, receiver stops playing sound with a poc eared in the speakers.
      Receiver still work and display video with error message on display.
      Seems to me that is the main output relay.

      I'm looking for the service manual that I can't find for the moment.

      Does somebody have it?

      Regards...
      08-03-2025, 06:10 AM
    • ugamazing
      820-02020 PPBUS_AON missing
      by ugamazing
      Board had no history of liquid; unsure of drop history, but no signs of damage of any kind worth noting.

      Charger sitting at 5v/0a. PPBUS is at 1.9v-0.9v steady cycle (peaks, drains, loops). Confirmed CHGR_EN_MVR is missing, but DCIN was reaching ISL just fine, so replaced ISL--no change at all. Confirmed pp3v8_aon is also missing--and being unsure *exactly* which signal appears first (or if they are simultaneous), I inspected PMU/U8100 area and found no shorts, but also found PP3V8_AON_MPMU_ISNS_VIN missing (not shorted). Replaced U8100 just in case (have had them fail in weird ways),...
      02-05-2025, 04:21 PM
    • benspawn02
      Anthem MRX500 - no sound. R2A15218FP issue??
      by benspawn02
      Anthem MRX500 - no sound

      Dear Electronics Experts:

      I have the following problem I am trying to troubleshoot. Unfortunately, I have contacted Anthem themselves and even a local distributer but I am not having much luck. Also, I have scoured the internet and unable to obtain a service manual. The Anthem service rep has also replied that he is unable to provide me with any service documentation. I have performed numerous searches on the internet and cross-referenced a few other AV receiver makers (Denon, Marantz, Onkyo) and found certain similarities to block diagram...
      08-12-2023, 04:46 AM
    • jpreza
      Apple NVIDIA AGP GeForce 6800 GT Dual Link DVI+DVI outputs 603-6338 missing caps!
      by jpreza
      Hi everyone,

      I recently acquired this card from a seller who was selling a PowerMac G5 for parts. He mentioned that the video card was probably broken too.

      Upon closer inspection, I can tell the reason why it won't work: it's missing a bunch of CAPS! (it's also missing an inductor - 1.0uH).

      It's a nice card as it's one of the few AGP cards that will support 2560 x 1600 resolution on a PowerMac G5 using a 30" Cinema Display.

      Looking at the card, it appears to be missing the following:

      1x 1.0uH inductor - orange square
      2x...
      1 Photo
      11-01-2024, 10:54 PM
    • ajvpb
      Denon AVR-S900W receiver repair struggles
      by ajvpb
      I picked up a Denon AVR-S900W with no power. Eventually I found a shorted 5339 3.3v regulator chip/ic on the hdmi board. I replaced that and was able to power on the receiver but it behaved oddly. Some of the buttons on the front wouldn't work, the volume knob wouldn't work and it didn't output any hdmi signal. I thought I may have soldered the new chip on wrong so I took it off and did some searching around. Apologies for the lack of zoom to see things more clearly.

      Service manual, on the page in question:
      https://www.manualslib.com/manual/95...100w.html?page...
      11-10-2020, 01:55 PM
    • Loading...
    • No more items.
    Working...