Logitech Ultimate Ears Boom 3

Collapse
X
Collapse
 
  • Page of 1
  • Time
  • Show
Clear All
new posts
Previous template Next
  • bartg1
    New Member
    • Jul 2019
    • 7
    • Poland
    #1

    Logitech Ultimate Ears Boom 3

    Hi.
    A have a dead Bluetooth speaker.

    After the battery is pluged in there is a power light for 3-4 sec and nothing else.
    A found a SPI IC on board and iam looking for dump of this IC.

    Maybe someone have something like that?

    Ive attached a photo of the board and IC.

    Thanks!
    Attached Files
    Tags: None
    Previous template Next

    Related Topics

    Collapse
    • Document Archive
      LENOVO ThinkCentre ThinkSmart Edition Tiny M920q for Logitech ThinkCentre M i5-9600T Specification for Upgrade or Repair
      by Document Archive
      This specification for the LENOVO ThinkCentre ThinkSmart Edition Tiny M920q for Logitech can be useful for upgrading or repairing a desktop PC that is not working. As a community we are working through our specifications to add valuable data like the ThinkCentre ThinkSmart Edition Tiny M920q for Logitech boardview and ThinkCentre ThinkSmart Edition Tiny M920q for Logitech schematic. Our users have donated over 1 million documents which are being added to the site. This page will be updated soon with additional information. Alternatively you can request additional help from our users directly on...
      09-12-2024, 01:58 PM
    • Document Archive
      ASUS ROG GX501VI-Ultimate-01 Notebook Zephyrus Specification for Upgrade or Repair
      by Document Archive
      This specification for the ASUS ROG GX501VI-Ultimate-01 Notebook can be useful for upgrading or repairing a laptop that is not working. As a community we are working through our specifications to add valuable data like the GX501VI-Ultimate-01 boardview and GX501VI-Ultimate-01 schematic. Our users have donated over 1 million documents which are being added to the site. This page will be updated soon with additional information. Alternatively you can request additional help from our users directly on the relevant badcaps forum. Please note that we offer no warranties that any specification, datasheet,...
      09-06-2024, 05:46 AM
    • Widget
      Logitech R20 speakers - Replacing one of the speakers.
      by Widget
      Hi guys,

      I have a set of Logitech R20 speakers, one of the speakers wasn't working, so I took it apart & there was no continuity or Resistance when probing the Tinsel Wires. Plus looks like the speaker was exposed to liquid as there's rust on the metal speaker frame.

      Just in case, I removed the other speaker and installed it in place of the damaged speaker to make sure the PCB of the damaged speaker was ok & it seemed to work fine, so it looks like it's just the speaker for now.

      Printed on the back of the Logitech speaker is;

      LOGITECH...
      4 Photos
      05-29-2024, 07:07 AM
    • dreamlayers
      Weird clipping on Logitech Z-10 speakers
      by dreamlayers
      I bought used Logitech Z-10 computer speakers. They can act as a USB audio device or accept line input, and they have a headphone output jack. Some music didn't sound right, so I played a frequency sweep and heard other frequencies and beat frequencies between them and the sweep. I uploaded a spectrogram of a frequency sweep. From the very start, some but not all odd harmonics are visible, indicating symmetric distortion. Then at higher frequencies there are descending images of those harmonics, indicating non-linearity and constant higher frequency noise mixing with the harmonics. The image of...
      Frequency sweep spectrogram
      2 Photos
      05-22-2025, 11:41 AM
    • tayl0rsw1ft
      Fix for Logitech Z906 speaker erratic function
      by tayl0rsw1ft
      Just passing this around if anyone has a problem with their Logitech z906 speakers--that one issue where all the lights all go haywire and resulting no sound issue. If you have access to an ESR meter, this will allow you to pinpoint which exact cap is causing the issue. But alas I didn't have one so I decided to go ham with the board and replace all of them with automotive-grade electrolytic caps.

      Tried the resistor fix but still no go.

      Sooo...I ended up replacing -all- the electrolytic caps on the board. Took me forever to finish due to the silicone glue they pot...
      05-14-2023, 07:46 PM
    • Loading...
    • No more items.
    Working...