I've been trying to find this transistor from my LCD thread. Any ideas on what it is or a substitute? Its from the inverter.
How can I replace this transistor?
Collapse
X
-
Re: How can I replace this transistor?
From the marking & package type, it looks like a BF622.
http://www.nxp.com/documents/data_sheet/BF620_622.pdf________________________________________________
Invisible airwaves crackle with lifeBright antennae bristle with the energy________________________________________________
Related Topics
Collapse
-
by CoinCoin88Hello everyone,
I'm turning to the Badcaps community to help me troubleshoot the radio Rx card from my (old) garage door opener. While I could just ditch that card and replace the whole system, I first would like to understand "why" it suddenly stopped working, because that's just how I am wired...!
Some basics: the receiver works on a 30.875 Mhz frequency. Yes, I'm aware this is not in use anymore in a looot of places. It does not use any rolling code, it's just a regular dip-switch code that you have to set up on both the receiver and transmitter. The receiver... -
by XiranHi to all!
I want to know, if somebody knows, with wich mosfet can i replace 28n03 (i´ve didn't found it like that)
VDS= 30 V, ID = 28 A RDS(on) < 18mΩ @ VGS = 10 V RDS(on) < 30mΩ @ VGS = 4.5V
Thx in advance!... -
by uenelooHi. I want to repair an Amlogic Android TV box. I'm not a professional, unfortunately in my city only people capable of repairing this stuff is mobile phone repairmen and understandbly they don't want to waste their time looking at low value devices like this. So I have to get my hands dirty with it.
I was trying to to enter maskrom mode (which involves shorting 2 feet of NAND flash) but needle accidentaly touched some feet it shouldn't, smoke came off and box doesn't turn on anymore (no led indicator light)
1R24, 1R25 and 1C29 looks blown. Also, U2 transistor gets hot when...08-20-2025, 10:31 AM -
by DXseekerMOHello all, I checked alltransistors.com for transistor TK15A50D substitute and they say there is none. Just wondering if anyone knows of a substitute?
Thanks! -
by flat-eartherI have a Hoover FM216LI cordless vacuum which isn't charging its internal battery.
I opened up the unit, and it has 6x Samsung ICR18650-22P cells connected in series.
5 cells were at about 3.3-3.1V. one was at 2.4V, so I assumed this cell was bad that's why the vacuum wasn't charging so I replaced it with another 18650, but after that the problem still persists, the vacuum turns on a bit and then cuts out since the batteries are empty.
So I think the over discharged battery wasn't the culprit, it was a symptom of the unit not being able to charge its batteries.... - Loading...
- No more items.
Comment