Pls tell me Generally what this is, and if you KNOW a substitute, what is that. Thanks, see pic, as I can read is C007?
Announcement
Collapse
No announcement yet.
Help Identifying component, what is this?
Collapse
X
-
Re: Help Identifying component, what is this?
Can you provide more information? IE: is one leg connected to ground? (regulator) or is voltage fed into one pin and out another (mosfet) Is there a board designator U, IC, Q, D etc. it seems to have a white arrow which might designate pin1
Two pins (2,3) appear to be connected to heavy traces and pin1 seems to be a thin trace indicating it could be for a gate or base connection. Does that thin trace running under the part connect to pin1? or are pins 1&2 connected together?Last edited by R_J; 10-04-2019, 02:47 PM.
-
Re: Help Identifying component, what is this?
Originally posted by captainKKK View PostPls tell me Generally what this is, and if you KNOW a substitute, what is that. Thanks, see pic, as I can read is C007?
What kind of board is this? laptop?
EDIT: I just saw the thin trace going to the bottom pin. Most likely some FET or Transistor.Last edited by KvnTM; 10-04-2019, 02:46 PM.
Comment
-
Re: Help Identifying component, what is this?
The blown part is directly under the LDVS1 video connectors, on the bottom of this Dell 2330 AIO Motherboard. None of the three pins go to ground. The thin trace went to pin 3 in my pic. Pins 1 and 2 are eventually connected through other elements and tracing. The tweezers point where the C 007 was. I have failed to find that part number on any component in the Russian 1200 page manual. Ideas? Let's take a guess......I got nothing to lose that's not already gone
Comment
-
-
-
Re: Help Identifying component, what is this?
My guess would be that it is a switch (mosfet) maybe to switch the panel/t-con voltage on and off if it is connected to the lvds cable. There is likely a supply voltage on either pin 1 or 2 and the control pin would be pin 3Last edited by R_J; 10-04-2019, 03:54 PM.
Comment
-
Re: Help Identifying component, what is this?
Yes, connected to lvds. RJ, can you suggest a common part number in that kind of package?Last edited by captainKKK; 10-04-2019, 03:52 PM.
Comment
-
Re: Help Identifying component, what is this?
Originally posted by captainKKK View PostYes, connected to lvds. RJ, can you suggest a common part number in that kind of package?
Please measure the resistance on all pads of the device to GND.
Just replacing it won't help. it will blow again.
Comment
-
Re: Help Identifying component, what is this?
.Last edited by captainKKK; 10-07-2019, 07:53 PM.
Comment
Comment