hi, can someone help me to find what this component is?
it is marked on the board RD1 and it's glass. here is a photo
thanks in advance
it is marked on the board RD1 and it's glass. here is a photo
thanks in advance
Attached Files
-
-
Re: component identification help
It's a Reed switch. Operated when a magnetic field comes near.________________________________________________
Invisible airwaves crackle with lifeBright antennae bristle with the energy________________________________________________ -
Re: component identification help
thanks mate
Comment
-
I am not sure if this is the right place to post this but I need help identifying a surface mount rectangle diode and all that is printed on it is "DK" it seems to be open so I can't read anything off it. It's in a HP laptop by the power switch. TIA for any help.
-
Hello everyone,
I have a problem with my Acer predator XB241YU screen. When I plug it in, the startup LED turns on instantly, and I can't turn off the screen without unplugging it.
After disassembly and inspection of the electronic cards I found what looks like a broken inductor, it is marked with the letter A and is at location L58.
In the first photo you can see the broken component, in the second photo you can see where it is on the board, in the third photo you can see the silkscreen and in the fourth photo you can see the identification sticker of the main board
I... -
Hello!
I have an Acer motherboard with a chip i can not find equivalent, its a MESC5V02BD03_SOT23-3 which has inscrit on it L5B.
Could somenone help me find a compatible or equivalent one?
Which kind of component might be this?
Thank you in advance.... -
Hello,
Device: PocketBook InkPad 3
Mainboard: XRZ_E091_PB740-VTTOA-V1.1 / 2017-10-12
I'm replacing the broken microUSB connector on this e-reader, and during inspection after desoldering, I noticed a loose black SMD component marked "CT". One of them was torn off along with the pad, while the other one (marked in the photo) is still in place.
I would appreciate help identifying this component.
Measuring the loose component with a multimeter gives 5.84 MĪ© in both directions, while the one still on the board shows no measurable... -
Good day, I need a photo of the board or a photo of the BIOS flash drive bindingToday, 02:51 AM
Comment