Datasheet matsushita

Collapse
X
Collapse
 
  • Page of 1
  • Time
  • Show
Clear All
new posts
Previous template Next
  • Nrond
    New Member
    • Sep 2011
    • 2
    #1

    Datasheet matsushita

    Hi Folks,

    looking for a CAP datasheet

    Matsushita
    47uF / 400V
    105°C
    Print (Series??) CE ED

    Radial black Silver
    diameter: 16mm
    hight : 25mm

    Datecode 2009


    any suggestions ? panasoic site did not realy help.

    BR
    Nrond
    Tags: None
    • Krankshaft
      Badcaps Legend
      • Jan 2007
      • 2328
      • USA
      #2
      Re: Datasheet matsushita

      That cap is part of the ED series:



      Anything with that high of a working voltage is going to be a general purpose cap.
      Last edited by Krankshaft; 09-10-2011, 04:30 AM.
      Elements of the past and the future combining to make something not quite as good as either.

        Comment

        • Nrond
          New Member
          • Sep 2011
          • 2
          #3
          Re: Datasheet matsushita

          thx for info

          found this one


          seems to fit better.
          mech size from snap ins do not match

            Comment

            Previous template Next

            Related Topics

            Collapse
            • SoulFreeze
              Help finding datasheet for component marked G34662
              by SoulFreeze
              Hi, pulled this component, (I'm assuming it's a MosFET) from an LED COB video light. Im trying to find the datasheet so I can find an equivalent replacement but no luck. Any assistance with the datasheet would be appreciated.

              Failing that, a way to pick a suitable replacement component? If it's indeed a switching fet, I'm assuming I might need to measure the switching clock frequency and find a component that meets the power capacity?

              Its a pair of them driving a 130w Light. Takes in 19volts. I can borrow a scope to measure the switching freq....
              05-01-2025, 03:56 AM
            • Rainbow_Chameleon
              Searching Datasheet for AM113 IC by O2MICRO
              by Rainbow_Chameleon
              I got a dead HD6950 on Ebay to try my luck and repair it. There were a few broken off capacitors that I already replaced.
              Measuring the PCI-E lanes I got somewhat weird measurements, the gpu might or might not be dead.

              If I plug the GPU in, the core heats up and I also get VCore but on two inductors that measure 16 and 60 Ohms respectively (Memory and PEX I guess) there is no voltage.
              On one of the two buck-controllers (APW7165) the enable pin is pulled to GND and the other controller I just cannot find a datasheet for.

              So if anyone has a datasheet or at least...
              01-23-2025, 12:03 PM
            • Document Archive
              Surface Mount Fuses Fundamentals Datasheet
              by Document Archive
              TE Circuit Protection offers the widest selection of surface-mount fuses available for addressing a broad range of overcurrent protection applications. Helping to prevent costly damage and promote a safe environment for electronic and electrical equipment, our single-use chip fuses provide performance stability to support applications with current ratings from .5A up to 20A.

              TE Circuit Protection also offers the telecom FT600 fuse for telecommunications applications. This telecom fuse helps comply with North American overcurrent protection requirements, including Telcordia, GR-1089,...
              10-07-2024, 06:07 AM
            • chth96
              Is there any datasheet for nichicon RT(M) series?
              by chth96
              A few days ago,I destroyed one of my japanese retro game console by pluging it to 220v outlet.
              https://www.badcaps.net/forum/troubl...e-been-blew-up

              and I finally fixed​ this retro game console by soldering varistor and glass fuse.

              But I noticed that When I measure voltage of PSU's 5pin connector, it is 8.80-9.07v, 5.13v,3.40-3.48v,GND,GND instead of its rated voltage of 9v 5v 3v GND GND.
              I have spare console...
              11-28-2023, 03:36 AM
            • alloverme
              Texas Instrument Datasheet TPS51486RJER
              by alloverme
              Hello,
              i have an issue with my laptop, i troubleshoot and i think i have some issues with this chip, i would like to understand how it work and wich voltage i should have output but i cant find the datasheet
              The chip is TPS51486RJER
              The input 13v and 5v are good but i have strange output 4.5V and i should have 1.2V and 2.5 V
              My post about my issue join
              thanks
              HP 15-eh0001nf with a start issue - Badcaps
              https://www.badcaps.net
              Hello, I have an HP 15-eh0001nf with a start issue, First it didnt start at all power button blinking blue and no screen, but seems a boot loop* I tried to remove most component - > same issueI see some little corroded component, clean them with isopropyle alcool and resamble all -> it worked during less than one
              07-20-2025, 10:08 AM
            • Loading...
            • No more items.
            Working...