Replacement for ICE2AS01

Collapse
X
Collapse
 
  • Page of 1
  • Time
  • Show
Clear All
new posts
Previous template Next
  • billy66
    Senior Member
    • Mar 2010
    • 124
    #1

    Replacement for ICE2AS01

    I need two of these chips: ICE2AS01

    Findchips shows only one place that has them... and you have to spend a min of $25 there on Quest. I don't need THAT many. I'm looking for another chip that might work. Any help?

    Thanks!
    Tags: None
    • jetadm123
      Badcaps Legend
      • Feb 2010
      • 2169
      #2
      Re: Replacement for ICE2AS01

      These controller chips are readily available on eBay from sellers based in the USA.

        Comment

        • billy66
          Senior Member
          • Mar 2010
          • 124
          #3
          Re: Replacement for ICE2AS01

          Thanks. I totally forgot about ebay. Brain fart I guess.

            Comment

            Previous template Next

            Related Topics

            Collapse
            • ugamazing
              Best place to source RAM chips? 8GB 820-00850 boards to 16GB or 32GB
              by ugamazing
              I'm looking to upgrade several 8GB 820-00850 boards to 16GB or 32GB for personal use. I am curious what the best practice and process is for sourcing new replacement chips, and what vendor(s) you guys prefer? Another question is, how do I find compatible chips and their corresponding part/model numbers? For example, in the 820-00850 schematic, the DDR chip U2600 model listed (EDFB232A1MA) corresponds to 1x32GB chip. Of course, I would need 4x8GB chips to replace the 4x2GB chips currently on the board. How do I find compatible 8GB chips? Is it as simple as searching "BGA178 8GB 2133"...
              08-31-2022, 07:34 AM
            • feherhollo
              WSON8 NEW Bios Chips READ, ERROR, ETC.
              by feherhollo
              Hi,
              I asking for help on some new WSON8 256MB chips. Please share your experience. I faced error on some new chips on read, erase, write with different programmers. These new chips are not exist in any programmers database. (GD25B256D, XM25RH256, W25Q256JV so on.)
              I'm using RT809F V.5.0, EZP2023 Pro, CH341A Green

              For the exact experience with GD25B256DYIG is RT809F erase the chip under 33sec. This kind of 256MB chip normal erase time is 70-120sec so I think not all the partitions are erased. If I do blank check or reread the buffer says FFFFFF but when I write the correct...
              11-26-2023, 09:33 AM
            • acedogblast
              Guide to transplant MEC1503 EC chip and EEPROM reprogamming for T14s gen 2 and X13 gen 2
              by acedogblast
              This is a guide that I am writing for helping others to replace their MEC1503 EC chip if it breaks (or to get around an inconvenient prompt to the BIOS). This forum has been extremely helpful to me so I would like to contribute to help others. I will tell you right now that this task is very difficult to do. You MUST have experience and tools to do precision micro-soldering, BGA reballing, trace repair, and general laptop repair skills.

              There are some specialty tools needed to do this task. The replacement MEC1503 chips can be acquired from Aliexpress. Do not buy the bare chips as...
              11-02-2024, 05:13 PM
            • reformatt
              Macbook Air M2 A2681 Kernel panics after screen replacement
              by reformatt
              Just had a customer bring in a M2 MBA A2681 that had had a screen replacement in April at another repairer. Since then, she has been getting intermittent kernel panics. It's an aftermarket screen, and of course it fails in diagnostics as the calibration hasn't been done. The error in the panic log is "No device added after powering on the rails".

              It seems the original repairer has swapped the board and the screen to other MAC's, and said that it isn't a screen issue. From what I understand, by doing a quick search on Google, this is in fact a screen issue. The panic relates...
              07-31-2025, 08:37 PM
            • the_rem
              Unknown transformer : how to find a good replacement part ?
              by the_rem
              Hello guys,

              I would like a quite old but still good 800 W ATX PSU to be repaired. The problem was an extremely heavy coil whine coming from the small secondary transfomer on the PCB.

              I desoldered it hoping the references on the upper side would allow me to find a adequate replacement part. Sadly the written references drove me nowhere but to the manufacturer (I-MAG). I sent them a message like a bottle in the see asking them to send me a datasheet of the transformer. And... They responded ! I received a kind of datasheet (see attachment) but my competencies do not allow...
              VEF20FB07BW(2025001A)20110927.pdf
              https://drive.google.com
              04-23-2025, 01:48 AM
            • Loading...
            • No more items.
            Working...