i have a ups from tripplite witch is somthing it dose not do i want to put it on a car battory in a rubbermaid tub want to use an externel charger need to know how sorry not that good at spelling
-
i have a ups from tripplite witch is somthing it dose not do i want to put it on a car battory in a rubbermaid tub want to use an externel charger need to know how sorry not that good at spelling
-
Re: ups hack
I've never liked Tripplite UPSes. Particularly since the 2 I had experience with both caught fire.36 Monitors, 3 TVs, 4 Laptops, 1 motherboard, 1 Printer, 1 iMac, 2 hard drive docks and one IP Phone repaired so far.... -
Re: ups hack
did you mean powerup UPS with car battery & need to charge it from UPS itself ?
most UPS desinged for charge Sealed leadAcid batteries at constant voltage. charging current 1/10 of battery Ah rating. So its take very long time to charge a car battery.
easiest way is build 14.4V 5A power supply and attach it to battery.Comment
-
Re: ups hack
they don't catch fire it's a small link on the bord that open'sComment
-
Re: ups hack
opp's 1st one did not show upComment
-
Hello.
This hack basically makes ps2 slim 7000x models able to load games via hdd like the ps2 fat with its hdd adapter via HD loader.
So I want to know if someone did this and how is the compatibility and all that ?
Here are the public pinouts on the motherboard
... -
Hello. the title might be a bit strange, but thiss is a passion project. Something more similar to what Dosdoode1 does on youtube than regular repair.
As much as Dosdoode hates planed obsolecense on mack boards i have something against garbage tier hp products, so i rescured some to experiment on. I have already discovered an "easy way" to put both sata and nvme ssd's on hp stream 14 ax motherboards, replaced cpu from celeron to pentium and published my successes on few repair forums so people could fix those boards when emmc chip dies. but now i would like to do the same for cb...07-20-2025, 02:53 AM -
title says it all
I've a Pixma mg2550s printer/scanner All In One
when I try to scan but there's no ink cartridge it gives an "error code 2,140,21"
scanning requires no ink so it's obvious this is a scam basically an artificial block they put in place for $ reasons
so how do I bypass this? is there a hack? maybe a fixed firmware
nb. got this new Pixma at a bargain price but I defo wont be buying another Canon product if there's no fix for this "feature" -
I have read about this hack for Samsung monitors with a potentially bad micro-controller chip, NT68F632--Novatek :
http://www.datasheet-pdf.com/PDF/NT6...Novatek-945645
I have a 2003 CRT Samsung 1100DF Syncmaster with "On" issues.
Please help! Thx!07-30-2022, 02:55 AM -
Hi! I was given this TV. It would turn on fine but then after a while the BL would shut off while rest of functions would stay working. I assume this 99% means a shortcut in the BL so the PS detects the overcurrent and shuts off the BL pwr.
I managed to keep it up for the time enough to enter into settings and turn down the backlight to 50% which seemed to help. I was able to watch it for some hours several days
But the other day, I went to try it and the BL didn't even start at boot up. I want to repair it but: This is a spare TV that I want to keep at a house that I seldom...
Comment