MJE9401 datasheet

Collapse
X
Collapse
 
  • Page of 1
  • Time
  • Show
Clear All
new posts
Previous template Next
  • japlytic
    Badcaps Legend
    • Oct 2005
    • 2086
    • Australia
    #1

    MJE9401 datasheet

    I am after a datasheet (or specifications) for a MJE9401 transistor.
    From what I know, it is in a TO-126 package and is an NPN type.
    What data I am after on this device is the current handling, maximum base-emitter and collector-emitter voltages and hFE.
    It is used in a 13.8V 5A linear power supply, and I want to cross-reference the MJE9401 to a current type.
    My first choice in quality Japanese electrolytics is Nippon Chemi-Con, which has been in business since 1931... the quality of electronics is dependent on the quality of the electrolytics.
    Tags: None
    Previous template Next

    Related Topics

    Collapse
    • SoulFreeze
      Help finding datasheet for component marked G34662
      by SoulFreeze
      Hi, pulled this component, (I'm assuming it's a MosFET) from an LED COB video light. Im trying to find the datasheet so I can find an equivalent replacement but no luck. Any assistance with the datasheet would be appreciated.

      Failing that, a way to pick a suitable replacement component? If it's indeed a switching fet, I'm assuming I might need to measure the switching clock frequency and find a component that meets the power capacity?

      Its a pair of them driving a 130w Light. Takes in 19volts. I can borrow a scope to measure the switching freq....
      05-01-2025, 03:56 AM
    • Rainbow_Chameleon
      Searching Datasheet for AM113 IC by O2MICRO
      by Rainbow_Chameleon
      I got a dead HD6950 on Ebay to try my luck and repair it. There were a few broken off capacitors that I already replaced.
      Measuring the PCI-E lanes I got somewhat weird measurements, the gpu might or might not be dead.

      If I plug the GPU in, the core heats up and I also get VCore but on two inductors that measure 16 and 60 Ohms respectively (Memory and PEX I guess) there is no voltage.
      On one of the two buck-controllers (APW7165) the enable pin is pulled to GND and the other controller I just cannot find a datasheet for.

      So if anyone has a datasheet or at least...
      01-23-2025, 12:03 PM
    • Document Archive
      Surface Mount Fuses Fundamentals Datasheet
      by Document Archive
      TE Circuit Protection offers the widest selection of surface-mount fuses available for addressing a broad range of overcurrent protection applications. Helping to prevent costly damage and promote a safe environment for electronic and electrical equipment, our single-use chip fuses provide performance stability to support applications with current ratings from .5A up to 20A.

      TE Circuit Protection also offers the telecom FT600 fuse for telecommunications applications. This telecom fuse helps comply with North American overcurrent protection requirements, including Telcordia, GR-1089,...
      10-07-2024, 06:07 AM
    • chth96
      Is there any datasheet for nichicon RT(M) series?
      by chth96
      A few days ago,I destroyed one of my japanese retro game console by pluging it to 220v outlet.
      https://www.badcaps.net/forum/troubl...e-been-blew-up

      and I finally fixed​ this retro game console by soldering varistor and glass fuse.

      But I noticed that When I measure voltage of PSU's 5pin connector, it is 8.80-9.07v, 5.13v,3.40-3.48v,GND,GND instead of its rated voltage of 9v 5v 3v GND GND.
      I have spare console...
      11-28-2023, 03:36 AM
    • alloverme
      Texas Instrument Datasheet TPS51486RJER
      by alloverme
      Hello,
      i have an issue with my laptop, i troubleshoot and i think i have some issues with this chip, i would like to understand how it work and wich voltage i should have output but i cant find the datasheet
      The chip is TPS51486RJER
      The input 13v and 5v are good but i have strange output 4.5V and i should have 1.2V and 2.5 V
      My post about my issue join
      thanks
      HP 15-eh0001nf with a start issue - Badcaps
      https://www.badcaps.net
      Hello, I have an HP 15-eh0001nf with a start issue, First it didnt start at all power button blinking blue and no screen, but seems a boot loop* I tried to remove most component - > same issueI see some little corroded component, clean them with isopropyle alcool and resamble all -> it worked during less than one
      07-20-2025, 10:08 AM
    • Loading...
    • No more items.
    Working...