Hi all,
where it's possible to buy original Amtech Rm-223 flux in Europe?
Tks
where it's possible to buy original Amtech Rm-223 flux in Europe?
Tks
-
This specification for the Acer Extensa EX2540-56BF + PowerCube Original Notebook can be useful for upgrading or repairing a laptop that is not working. As a community we are working through our specifications to add valuable data like the EX2540-56BF + PowerCube Original boardview and EX2540-56BF + PowerCube Original schematic. Our users have donated over 1 million documents which are being added to the site. This page will be updated soon with additional information. Alternatively you can request additional help from our users directly on the relevant badcaps forum. Please note that we offer...09-06-2024, 08:16 AM
-
I want to purchase any good flux remover But "chemistronic flux off es835b" is the most common flux remover in my nation..
Is it good to use chemistronic flux off es835b for flux remover?
Or I have to purchase "3m novec flux remover" which is quite expensive in my nation? -
Good Day.
today i have received 3x30cc amtech nc559-v3-tf from their UK distributor.. the flux i received us orange in color which resembles to most of the fake fluxes.
does anyone has seen the original flux or they may have already bought..? can you compare if the flux i received is authentic..?
See picture please..
https://files.fm/u/mh9va5ug7
Best Regards... -
REWORK FLUXES Multifix 425-01 and 450-01 are tacky fluxes designed for use in a wide range of electronics assembly and rework processes. They represent a range of activities and residue levels to meet different customer requirements.
- No Clean Formulations
- Low residue
- Range of activity to deal with different component solderability
- Halide free
- Suitable for dispensing
- Compatible with solder coatings and/or No Clean flux cored solder wire product range
Both products are supplied in syringes or cartridges for application by dispensing....10-07-2024, 06:02 AM -
Now that my de-soldering gun is working i was able to remove this panel i made about a week before i noticed a issue the F segment of digits 2 and 3 would go out, digit 2 would go before digit 3, but would come back after the humidity got down from running the ac (note the weather outside is 30.5 / 74%; panel data is from a BME280)
Temp is on the left humidity is on the right
i noticed when the humidity got up one or 2 of the center digits on the right panel would loose a segment
The pin out looking down from the top is (note this is common cathode)...
Comment