Announcement

Collapse

Forum Rules *ALL NEW MEMBERS, PLEASE READ!! UPDATED!!*

First and foremost, Welcome to the Badcaps Capacitor Search Engine & Forums!

New members that have activated their accounts have limited access to certain features of the site until established. Members with zero posts have no access to the private messaging system. Also, members with zero posts may not edit certain profile attributes, such as signatures. New members also may not create new threads. However, new members with zero posts have full access to all technical information contained on this forum, and that also includes attachments (images and files that other members have uploaded), and new members that have activated their accounts are free to post replies to existing threads. If you wish to create a new thread, the fix is simple! All you need is ONE post to be able to have full unrestricted access, and that can be simply posting an introduction of yourself or say hello in THIS THREAD. This may seem a little strange, but it helps keep spam and abuse curved. Please note, that it may take up to one hour from your first post for the limits to be removed. If you make a post and don't immediately see the restrictions gone, be patient. The promotion system updates every hour.

Please complete your profile after making your first post, with your name, locale, and other info. It's nice to know members on a first name basis, and know where they're from. Makes for a much friendlier environment!

Posting rules for this forum will be STRICTLY enforced by myself as the owner/administrator, and my moderator crew.

Badcaps.net IS A BUSINESS!!! If you are a servicer, service center, or vendor of any kind in the computer/capacitor industry, you are NOT permitted to advertise, link, promote, or plug your business on this forum in ANY way! NO EXCEPTIONS!! This includes asking for "donations" in exchange for BIOS passwords or tech advice for anything! If I see you doing that, your post will be edited or deleted, and you warned. If it happens again, you will be banned. The only exceptions are the references to the companies quoted in the FAQ which the administration have added for the convenience of those around the world who have difficulty to source caps for their repair.

This also includes using this forum's private message system to solicit business. Members, if you receive a PM from anyone offering repair services or components, please alert me immediately! Myself or any of my moderators, will never private message a user soliciting business, for Badcaps.net, or any other servicer/vendor. If you PM me about repairing your device, I will reply and take care of you, however, I will not message you first.

------------------------------------

Posting rules:

This forum was created to be a technical support forum primarily for the do-it-yourselfers who choose to repair their own boards. Any and all technical questions are welcome!

1) Please use the SEARCH feature!! Your question may have been answered in another thread! Please search first and see if it has!

2) When posting a technical question, be as detailed as possible in your thread. The more information we have about your specific problem, the better we can answer your question.

3) Please use COMPLETE sentences, punctuation, and grammar! Nobody is perfect, hence, a spelling error on occasion is no biggie. However, posts/threads that are unreadable will be deleted. This includes any and all forms of 'ebonics', leet, chatroom jargon, and 'text message' shorthand and slang. This forum is not a chatroom/text message, please use full words and complete sentences.

4) Keep discussion on topic!! DO NOT HIJACK THREADS! It's easy to do (I've done it myself a few times...) Lets try to keep it down to a minimal!! If you have something really off topic, that's what the lounge is for!

5) Keep things civil! There will be no tolerance for flaming, bashing, hateful remarks, racial remarks, adult material of ANY kind, and so on.

6) THE LOUNGE RULES! The lounge is a place for off topic chit-chat! If you post something that might be considered questionable or something you don't want kids to see, or something you can't view at work/school, etc, please label that thread *NWS* or NOT WORK SAFE in the thread title as a warning. The Lounge is NOT moderated, anything is welcome... Feel free to post rants, jokes, cars, hot women (remember the NWS warning in the title), or just about anything within reason. It's an open forum! Please refrain from participating in political topics if you have thin skin, they can get heated sometimes!! Remember that we have members here from all over the world, with many different views and cultures. Political debates can turn really ugly, and really fast, and if they degrade to personal attacks and useless banter/bashing, moderator action will ensue. I want this forum to be a safe haven for technical discussions from all walks of life, so lets keep off topic discussions civil and friendly.

7) Spamming and spammers will NOT be tolerated or accepted in any way, shape, or form! Spam bots are instantly and permanently banned, and their threads deleted! The mod crew is really quick to zap spammers, we typically pop them before they even get to post. This also includes regular members as well. be courteous and not post spam. This includes links to off-site information that's not relevant to the thread at hand. Do not plug other websites, forums, or businesses in your signatures. You may do so in a thread if the off-site link you're posting is relevant to the topic, but otherwise, don't do it. If you see a thread which clearly a spam bot posting that we have not removed yet, DO NOT click any links in it!! Simply click the 'report bad post' button, and it'll be taken care of, usually within minutes.

8) Account removals & closures: Since no personal information is given in the creation of your Badcaps.net Forum account, requests to remove and/or delete accounts will be declined. Any requests for removal of threads & posts you created will also be declined. The reason is the missing posts can/will leave threads incomplete and fragmented. For the threads to be of help to others later on, information can't and won't be missing. However, if you inadvertently posted personal identifiable information in a post (such as an email address, real name, or phone number), please contact a staff member. In those cases, the post may be edited or removed, at the staff members discretion.

That's about it for the rules, the setup here is pretty loose. However, if you're caught violating any of the rules above, here's what will happen:

First offense: Warning by me or a moderator
Second offense: Banning for 1 day
Third offense: Banning for 3 days
Fourth offense: Banned permanently.

If you do something really dumb, or are just a troll, I will skip the warning and the temporary banning, and ban you permanently!

The rules are pretty cut and dry... However, if you have any questions about this policy, feel free to contact me.
See more
See less

ESR meter upgrades

Collapse
This is a sticky topic.
X
X
 
  • Filter
  • Time
  • Show
Clear All
new posts

    Re: ESR meter upgrades

    Stj i thought i would try that tl866 progrmmer i picked up when i try too read the good working atmeg328p all what it comes up with is ff on all the read info no data etc are these chips copy protected? have you got the complete hex file with boot files etc inc as i just want to test this programmer and also get the esr kit i built working (which works fine is i use the other atmeg 328p ic) for some reason it just wont read the good chip? so i cant copy contents from it.
    Last edited by vinceroger69; 07-12-2016, 07:58 AM.

    Comment


      Re: ESR meter upgrades

      EZ studio's chips are protected.
      no big deal as it's just the regular code from the author.

      try this one.
      Attached Files

      Comment


        Re: ESR meter upgrades

        hi tried that although the screen now stays on it has two rows of scrolling symbols thats all

        Comment


          Re: ESR meter upgrades

          hows the contrast?

          Comment


            Re: ESR meter upgrades

            that was ok same as my working unit just to comfirm im still using the 8mz crystal so i opened the 8mhz data and put the three files into the programmer make file, ,and the hex one then wrote data to chip is that the correct way

            Comment


              Re: ESR meter upgrades

              Originally posted by Per Hansson View Post
              Yes, especially since the seller has one for sale assembled aswell!
              I bought one too but I'm still waiting for it, so I'm very thankful for your work on this vinceroger
              Hi just wondered if you managed to build your tester kit? and did your atmega328p ic have data on it as mine did not.

              Comment


                Re: ESR meter upgrades

                i dont know how that programmer works.
                but you only need the hex and eep files.


                try this one.
                Attached Files

                Comment


                  Re: ESR meter upgrades

                  Originally posted by vinceroger69 View Post
                  Hi just wondered if you managed to build your tester kit? and did your atmega328p ic have data on it as mine did not.
                  mine was not a kit, it was the older version - 100% surface-mount and no rotary encoder.

                  it was copy protected and i had to draw up a schematic and patch the code to match it.
                  i also had to change the default contrast because initially the display looked blank!

                  Comment


                    Re: ESR meter upgrades

                    sorry stj i meant Per Hannson regarding the same kit he brought as me, its a good job stj you have experience in programing i have no idea but i am learning slowly i will try the above file and let you know thanks again.

                    Comment


                      Re: ESR meter upgrades

                      how does that programmer handle the 3 fuse bytes?
                      you MUST set them with the values in the first archive.

                      Comment


                        Re: ESR meter upgrades

                        dave from eeblog has a good you tubevideo on this programmer minipro tl866cs
                        Is a sub $50 universal programmer from ebay any good?Dave checks out the MiniPro TL866 programmer:http://autoelectric.cn/MiniPro/Chip support list: http://ww...

                        i will take a picture of the screen now about the fuses etc
                        Attached Files
                        Last edited by vinceroger69; 07-12-2016, 08:52 AM.

                        Comment


                          Re: ESR meter upgrades

                          what a pain.

                          o.k.
                          play with those tick boxes to get the low-fuse to F7
                          and the high-fuse to D9
                          and the extended fuse to FC

                          Comment


                            Re: ESR meter upgrades

                            fuses was easy too set up as per your guide still scrolling display with one of your zip files and just a blank display with the other zip file
                            just a thought stj when adding your files i can add them as code memo or data memo which one is correct?
                            Last edited by vinceroger69; 07-12-2016, 09:24 AM.

                            Comment


                              Re: ESR meter upgrades

                              hex is code, eep is data - you need both because the fonts are in the eep file!

                              Comment


                                Re: ESR meter upgrades

                                ok will try again lol as was putting both in code

                                Comment

                                Working...
                                X