Just wanted to share this video tutorial of the RE-8500 bga rework station.
https://www.youtube.com/watch?v=43EB_ZYoCcc
https://www.youtube.com/watch?v=43EB_ZYoCcc
-
-
Jovy i solder 40-solder station tips
Hi, does anybody know where i can get Jovy i solder 40-solder station tips from. I'm looking for the spatula JV-TP45, JV-TP44, JV-TP43 -
Re: Jovy RE-8500
Email me your list to support@bgareworkstation.co.uk Ive got a order going in with Jovy in the next couple of days .. B.T.W my site ie www.bgareworkstation.co.ukComment
-
Re: Jovy RE-8500
I replied to your email you sent me. Thank youComment
-
Re: Jovy RE-8500
weird havent recieved any email can you email again to support@bgareworkstation.co.ukComment
-
Re: Jovy RE-8500
Hi Tony (BGA) just sent you another email about the jovy tips, you do know I'm the one buying the jovy i solder 40-solder station from you, who you phoned the other day
Comment
-
Re: Jovy RE-8500
thanksComment
-
Good day.
i received used bga rework station wds-580 which was not going above 300c despite the parameter was set to 350c, Everytime beeps at 300c so i did a factory reset and by mistake washed data and log etc. now the station boots to a white screen.
Does anyone has a firmware for this station and want to share with me. i will really appreciate any help possible..
kind regards...03-28-2024, 01:14 PM -
hi all im looking for a Schematic for jbc am6800 rework station
mine has stopped working fully
it started with turning off when switched on then after a few off and ons it worked sort of for awhile
now it wont turn on at all...01-28-2025, 03:44 PM -
Good day Experts.
I have recently aquired a rework station SEAMARK ZM-R6800,. Is there anyone using this or some other similar station and give me some info about profile temp curve etc for removing leadfree soldered gpu chip..? just 1 profile will be enough to get started.
Kind regards -
Hi Everyone,
I bought a Yihua 992DA+ hot air gun and soldering iron unit from a used market.
1. Soldering iron works great
2. There is a burnt mark on the hot air gun handle.
I am a bit concern by the look of the melted plastic. I opened the hot air gun handle and took some readings with a multimeter.
Heating element ~ 75ohm. (Similar reading taken from a spare heating element that came with the unit.)
Thermocouple ~ 1.5ohm. (Similar reading from the spare heating element.)
Reed switch tested ok with a magnet.
From the above test, I can conclude... -
This specification for the HP Station de travail Z2 format tour G4 can be useful for upgrading or repairing a desktop PC that is not working. As a community we are working through our specifications to add valuable data like the Station de travail Z2 format tour G4 boardview and Station de travail Z2 format tour G4 schematic. Our users have donated over 1 million documents which are being added to the site. This page will be updated soon with additional information. Alternatively you can request additional help from our users directly on the relevant badcaps forum. Please note that we offer no...09-12-2024, 02:20 PM
Comment