Re: which material need for reballing bga ?
All prices are based on u.k pounds any machines have shipping costs included for the whole of the E.U no extra taxes included buddy
BGA Rework Store
Member
Last Activity: 08-27-2015, 08:24 PM
Joined: 03-29-2015
Location: london
-
Can you help me with my PUHUI BGA IRDA WELDER T-890, I had a power failure and my T-890 was in full operation and operating at high temperature. when the power came back on my T890 wouldn't turn on. I check the fuse which was good, next I check the heater plates but I'm not sure if what I measure is good or bad. should I post the problem to the forum? -
Re: which material need for reballing bga ?
Your Need Reball Jig , Stencils , flux , solder balls , Braid , a good tip for your solder station I can assit you with your supplies and have a offer on at the moment on solder balls £3.50 for a 25k bottle buy 2 at £6.00 my site is [url]www.bgareworkstation.co.uk[/url] feel free to email me at [email]support@bgareworkstation.co.uk[/email]Re: which material need for reballin...plies and haveLeave a comment:
-
Re: Jovy RE-8500
weird havent recieved any email can you email again to [email]support@bgareworkstation.co.uk[/email]Re: Jovy RE-8500<br /> <br /> weir....co.uk[/email]Leave a comment:
-
Re: Jovy RE-8500
Email me your list to [email]support@bgareworkstation.co.uk[/email] Ive got a order going in with Jovy in the next couple of days .. B.T.W my site ie [url]www.bgareworkstation.co.uk[/url]Re: Jovy RE-8500<br /> <br /> Emai...on.co.uk[/url]Re: Jovy RE-8500
Email me your list to [email]support@bgareworkstation.co.uk[/email] Ive got a order going in with Jovy in the next couple of daysLeave a comment:
-
Re: Tools for the job
I havent because these are so cheap [url]http://www.ebay.co.uk/itm/like/221336501364?limghlpsr=true&hlpv=2&ops=true&viphx=1&hlpht=true&lpid=108&chn=ps&device=c&rlsatarget=&adtype=pla&crdt=0&ff3=1&ff11=ICEP3.0.0-L&ff12=67&ff13=80&ff14=108&ff19=0[/url]Re: Tools for the job<br /> <br /> ...lsatarget=&adtLeave a comment:
-
Re: Tools for the job
It happens to us all shame you already have it as you have the right to cancel under closed diatant selling laws . These are something I follow closely . Im doing somw promos this weekend 2 for 1 on solder balls and by the way my amtech is orginal not fake no holographic rubbish here newtothis can vouch as he got some from me plus its stored in a fridge so its all nice and goodLeave a comment:
-
Re: Tools for the job
Thanks for the order . B.t.w the ts1 has the new magnetic base . Bigger magnets than before the hontons as advertised are sourced from a large manufacturer so they better be genuine otherwise that manufacturer will loose their right to sell in the e.u . As per site that is my best price. Products will be shipped first thing tomorrow. £725 is my price this includes shipping costs and because they are already here in the u.k there are no duty fees to payLast edited by BGA Rework Store; 04-24-2015, 05:54 PM.Leave a comment:
-
Re: Tools for the job
saike are not bad smd's but they are copies of atten to which i sell [url]http://bgareworkstation.co.uk/solder-station/atten-at8586.html[/url]
mind if I ask what price have you been given on the honton ?. One thing to bear to mind Im U.K based and can answer emails on g.m.t not china time and if you need accessories i can put together package deals for you as wellRe: Tools for the job<br /> <br /> ...ml[/url]<br />Leave a comment:
-
Re: Puhui T-870A reballing station, good or not ?
I am U.K based any machines that I stock in the U.K are shipped anywhere in the E.U with no extra costs , The IR6000 is u.k stock and yes you will get a free solder station as well and they can be shipped to you,Leave a comment:
-
Re: Puhui T-870A reballing station, good or not ?
Your find on my webstore I dont advertise that machine as Th3_uN1Qu3 has quite simply put it , Its rubbish , feel free to take a visit and email me if you need anything else ,Leave a comment:
-
Re: Moving onto BGA work
best way to remove fets is low melt alloy soak it in and they get nice and wet eaiser to remove than heat aloneLeave a comment:
-
Re: BGA non direct stencil help
think of a grain of rice put that amount on flux should be genuine if its amtech and got a holographic sticker (fake ) I dont sell fake amtech full of cheap crap , But if its orginal a grain of rice size and rub that all over the chip is more than enough, remember good flux is very tacky so little is best , also if you have been using alot of flux you may have clogged the holes on the stencil for stencils I sell the 9050 from aoyue drop those in job done , you can drop down .5 on solder balls but its down to flux and stencil use , dont panic when...Leave a comment:
-
Re: Moving onto BGA work
newtothis the achi ir6500 is a good machine but i.m.o if you want to move on to bigger boards at some time you may have trouble with the bottom heater , My webstore has a great offer on atm with the Scotle ir6000 and its available in the U.K for fast shipping . Dont forget the Achi is owned by scotle but with this machine your get better bottom heat if the admins dont mind here is the link buddy
[url]http://bgareworkstation.co.uk/BGA-Stations/Scotle-Achi/scotle-ir6000-uk-stock.html[/url]
I'de rather you get a good machine at a...Leave a comment:
-
Re: New Members - please post your introductions here
Hi Guys , Been lurking thought I'de join in on the fun , My name is Tony and is the owner of a bga rework supply website.. I am here to hopefully offer unbiased advise to people and hopefully gain the trust for people to purchurse. Looking forward to helping others . B.T.W Im U.K based but can supply worldwide if needed. RegardsLeave a comment:
No activity results to display
Leave a comment: