blackberry torch 9800
i there can anybody help me i have a blackberry torch 9800 and it wont turn on or i get is a blinking led light my pc finds it but it wont let me do a update as it keeps failing i have tried the motherboard in another working blackberry but still the same so its a mother board fault so could anybody tell me the faults on these boards
-
This specification for the HP Pavilion 570-p042ur can be useful for upgrading or repairing a desktop PC that is not working. As a community we are working through our specifications to add valuable data like the Pavilion 570-p042ur boardview and Pavilion 570-p042ur schematic. Our users have donated over 1 million documents which are being added to the site. This page will be updated soon with additional information. Alternatively you can request additional help from our users directly on the relevant badcaps forum. Please note that we offer no warranties that any specification, datasheet, or download...09-12-2024, 02:00 PM
-
Hey all, I'm having a decent amount of trouble finding a schematic/boardview and hope someone here might be able to assist.
name: Blackberry Passport (Q30)
model: SQW100
board: (any variant)04-06-2025, 02:14 PM -
Hopefully this falls under "weird devices".
I have a small torch, nothing special. I tried using it today, but it turned off after a few seconds. This happened a few times. Then the LED inside started to get dim and flicker, then it would go off, then it would come on bright, then off, then on dim and flicker etc... if you get my drift. The battery is a AA 1.5v which works fine.
Now, it won't come on, so thought I'd tear it down and have a tinker. I'm still a novice, so don't really know what I'm doing. I thought I'd try the LED to see if it works (which... -
ASUS EN9800GTX+ DK C392PL GeForce 9800 Boardview
Rev 1.00 60-CICML0-A11...10-22-2024, 12:45 PM -
Greetings to all. In an electronics market I found this old video card: NVIDIA GEFORCE 9800 GT 1 gb.
The card is not detected by the pc.
Do you know what the small white connector at the top near the output connectors is for?
Thank you for your reply...