Beckman Industrial 320B

Collapse
X
Collapse
 
  • Page of 3
  • Time
  • Show
Clear All
new posts
Previous 1 2 3 template Next
  • turbozutek
    Senior Member
    • Jan 2009
    • 71
    #41
    Re: Beckman Industrial 320B

    You could try soldering in a larger piezo beeper - failing that a transistor (one side to the battery + the other the beeper output driving something a bit larger could be an idea?

    Could go as loud as a smoke alarm sounder if you wanted with that one!

      Comment

      • DavidOH
        Senior Member
        • May 2012
        • 105
        • USA
        #42
        Re: Beckman Industrial 320B

        There's a good chance I'll end up with a hearing aid soon. With out the back it's loud enough. I could drill a hole the size of the beeper opening in the back and it would be fix it. But I'd rather not do that at this time. So I'll live with it for now. Unless I find a easy fix online.

          Comment

          • retiredcaps
            Badcaps Legend
            • Apr 2010
            • 9271
            #43
            Re: Beckman Industrial 320B

            Originally posted by DavidOH
            I could drill a hole the size of the beeper opening in the back
            Any modification to the multimeter voids your 3 Fluke warranty on the 115.
            --- begin sig file ---

            If you are new to this forum, we can help a lot more if you please post clear focused pictures (max resolution 2000x2000 and 2MB) of your boards using the manage attachments button so they are hosted here. Information and picture clarity compositions should look like this post.

            We respectfully ask that you make some time and effort to read some of the guides available for basic troubleshooting. After you have read through them, then ask clarification questions or report your findings.

            Please do not post inline and offsite as they slow down the loading of pages.

            --- end sig file ---

              Comment

              • DavidOH
                Senior Member
                • May 2012
                • 105
                • USA
                #44
                Re: Beckman Industrial 320B

                I know that's why I'll just live with it. Looking at the screen isn't that bad.

                  Comment

                  • retiredcaps
                    Badcaps Legend
                    • Apr 2010
                    • 9271
                    #45
                    Re: Beckman Industrial 320B

                    Agilent's 123x offering is a direct competitor to the Fluke 11x series.

                    It offers continuity with a traditional buzzer in addition to a flashing screen. See this short 1 minute and 10 second video.

                    http://www.youtube.com/watch?v=vQei73k9mNg

                    In addition, you can change the beep frequency to either 3.2, 3.4, 3.8 or 4.2kHz. You can't change the loudness though.





                    Personally, I have been trying to get one, but they are hard to find used.
                    --- begin sig file ---

                    If you are new to this forum, we can help a lot more if you please post clear focused pictures (max resolution 2000x2000 and 2MB) of your boards using the manage attachments button so they are hosted here. Information and picture clarity compositions should look like this post.

                    We respectfully ask that you make some time and effort to read some of the guides available for basic troubleshooting. After you have read through them, then ask clarification questions or report your findings.

                    Please do not post inline and offsite as they slow down the loading of pages.

                    --- end sig file ---

                      Comment

                      Previous 1 2 3 template Next

                      Related Topics

                      Collapse
                      • mholin
                        Beckman Industrial/(later Wavetek) Digital Multimeter DM27XT Repair
                        by mholin
                        Was testing to see if a bug zapper grid voltage (=< 2800VDC) had discharged yet. Set meter to highest range (1000 VDC) and probed across the grid. Heard an audible arc so voltage must have discharged into something in the front end of the meter. Now all functions that use the V-Ohm/Com input just reads "OL" (over range). Even the continuity test with the probes shorted reads OL with no beep. Opened it up and found input resistor R31 47 ohms, completely open. Replaced with new resistor but meter still reads "OL". The low battery icon on the display is visible even...
                        08-18-2024, 12:58 PM
                      • I8jjrnhh4thvtl0dWZoY
                        Repair Manual for Bosch SHX55M05UC/46 Dishwasher (702_58300000148618_ara_en_a)
                        by I8jjrnhh4thvtl0dWZoY
                        Repair manual part number 702_58300000148618_ara_en_a

                        It took way too much effort to find this manual so I am sharing it here so the next person can find it easily. Also, I am mad at Bosch for not publishing it on their website, so they deserve to have it leaked....
                        07-14-2025, 07:36 PM
                      • Document Archive
                        STM32F103C8, STM32F103R8, STM32F103V8, STM32F103T8, STM32F103RB, STM32F103VB, STM32F103CB, STM32F103TB Datasheet
                        by Document Archive
                        The STM32F103C8, STM32F103R8, STM32F103V8, STM32F103T8, STM32F103RB, STM32F103VB, STM32F103CB, STM32F103TB medium-density performance line family incorporates the high-performance Arm Cortex-M3 32-bit RISC core operating at a 72 MHz frequency, high-speed embedded memories (Flash memory up to 128 Kbytes and SRAM up to 20 Kbytes), and an extensive range of enhanced I/Os and peripherals connected to two APB buses. All devices offer two 12-bit ADCs, three general purpose 16-bit timers plus one PWM timer, as well as standard and advanced communication interfaces: up to two I2Cs and SPIs, three USARTs,...
                        10-07-2024, 04:40 AM
                      • abhorsen
                        Help Disabling Flash Protection Range Registers on Lenovo P360 Tiny BIOS
                        by abhorsen
                        Hey guys,

                        Hope you all are doing well. I come here from Win-Raid because I am having issues disabling Flash Protection Range Registers so I can flash my BIOS from within Windows using Intel's IFW tool/using flashrom within Linux, however I cannot due to the above mentioned error.

                        Here is my thread on Win-Raid detailing the whole process I went through: https://winraid.level1techs.com/t/re...h-gen/95478/27

                        Essentially I managed to boot into Windows while shorting PINs 1+5 of my audio chip to disable the HAP bit...
                        07-06-2023, 10:22 AM
                      • Document Archive
                        Postcard 32 4-Bit 4-Digit Diagnostic Card PC Analyzer Manual
                        by Document Archive
                        Postcard 32 4-Bit 4-Digit Diagnostic Card PC Analyzer Manual

                        Diagnostic Card is a powerful diagnostic tool for technicians and administrators to troubleshoot
                        various problems of IBM compatible PCs. It is easy to install, yet extremely powerful to use. With
                        Diagnostic Card in hand, you no longer have to go through tedious and time consuming process of
                        trying to figure out what is wrong with your PC hardware. Diagnostic Card will tell you exactly
                        what is wrong with your PC in just seconds. It saves you time and money.

                        Our new and improved design...
                        11-01-2024, 06:29 AM
                      • Loading...
                      • No more items.
                      Working...