Announcement

Collapse

Forum Rules *ALL NEW MEMBERS, PLEASE READ!! UPDATED!!*

First and foremost, Welcome to the Badcaps Capacitor Search Engine & Forums!

New members that have activated their accounts have limited access to certain features of the site until established. Members with zero posts have no access to the private messaging system. Also, members with zero posts may not edit certain profile attributes, such as signatures. New members also may not create new threads. However, new members with zero posts have full access to all technical information contained on this forum, and that also includes attachments (images and files that other members have uploaded), and new members that have activated their accounts are free to post replies to existing threads. If you wish to create a new thread, the fix is simple! All you need is ONE post to be able to have full unrestricted access, and that can be simply posting an introduction of yourself or say hello in THIS THREAD. This may seem a little strange, but it helps keep spam and abuse curved. Please note, that it may take up to one hour from your first post for the limits to be removed. If you make a post and don't immediately see the restrictions gone, be patient. The promotion system updates every hour.

Please complete your profile after making your first post, with your name, locale, and other info. It's nice to know members on a first name basis, and know where they're from. Makes for a much friendlier environment!

Posting rules for this forum will be STRICTLY enforced by myself as the owner/administrator, and my moderator crew.

Badcaps.net IS A BUSINESS!!! If you are a servicer, service center, or vendor of any kind in the computer/capacitor industry, you are NOT permitted to advertise, link, promote, or plug your business on this forum in ANY way! NO EXCEPTIONS!! This includes asking for "donations" in exchange for BIOS passwords or tech advice for anything! If I see you doing that, your post will be edited or deleted, and you warned. If it happens again, you will be banned. The only exceptions are the references to the companies quoted in the FAQ which the administration have added for the convenience of those around the world who have difficulty to source caps for their repair.

This also includes using this forum's private message system to solicit business. Members, if you receive a PM from anyone offering repair services or components, please alert me immediately! Myself or any of my moderators, will never private message a user soliciting business, for Badcaps.net, or any other servicer/vendor. If you PM me about repairing your device, I will reply and take care of you, however, I will not message you first.

------------------------------------

Posting rules:

This forum was created to be a technical support forum primarily for the do-it-yourselfers who choose to repair their own boards. Any and all technical questions are welcome!

1) Please use the SEARCH feature!! Your question may have been answered in another thread! Please search first and see if it has!

2) When posting a technical question, be as detailed as possible in your thread. The more information we have about your specific problem, the better we can answer your question.

3) Please use COMPLETE sentences, punctuation, and grammar! Nobody is perfect, hence, a spelling error on occasion is no biggie. However, posts/threads that are unreadable will be deleted. This includes any and all forms of 'ebonics', leet, chatroom jargon, and 'text message' shorthand and slang. This forum is not a chatroom/text message, please use full words and complete sentences.

4) Keep discussion on topic!! DO NOT HIJACK THREADS! It's easy to do (I've done it myself a few times...) Lets try to keep it down to a minimal!! If you have something really off topic, that's what the lounge is for!

5) Keep things civil! There will be no tolerance for flaming, bashing, hateful remarks, racial remarks, adult material of ANY kind, and so on.

6) THE LOUNGE RULES! The lounge is a place for off topic chit-chat! If you post something that might be considered questionable or something you don't want kids to see, or something you can't view at work/school, etc, please label that thread *NWS* or NOT WORK SAFE in the thread title as a warning. The Lounge is NOT moderated, anything is welcome... Feel free to post rants, jokes, cars, hot women (remember the NWS warning in the title), or just about anything within reason. It's an open forum! Please refrain from participating in political topics if you have thin skin, they can get heated sometimes!! Remember that we have members here from all over the world, with many different views and cultures. Political debates can turn really ugly, and really fast, and if they degrade to personal attacks and useless banter/bashing, moderator action will ensue. I want this forum to be a safe haven for technical discussions from all walks of life, so lets keep off topic discussions civil and friendly.

7) Spamming and spammers will NOT be tolerated or accepted in any way, shape, or form! Spam bots are instantly and permanently banned, and their threads deleted! The mod crew is really quick to zap spammers, we typically pop them before they even get to post. This also includes regular members as well. be courteous and not post spam. This includes links to off-site information that's not relevant to the thread at hand. Do not plug other websites, forums, or businesses in your signatures. You may do so in a thread if the off-site link you're posting is relevant to the topic, but otherwise, don't do it. If you see a thread which clearly a spam bot posting that we have not removed yet, DO NOT click any links in it!! Simply click the 'report bad post' button, and it'll be taken care of, usually within minutes.

8) Account removals & closures: Since no personal information is given in the creation of your Badcaps.net Forum account, requests to remove and/or delete accounts will be declined. Any requests for removal of threads & posts you created will also be declined. The reason is the missing posts can/will leave threads incomplete and fragmented. For the threads to be of help to others later on, information can't and won't be missing. However, if you inadvertently posted personal identifiable information in a post (such as an email address, real name, or phone number), please contact a staff member. In those cases, the post may be edited or removed, at the staff members discretion.

That's about it for the rules, the setup here is pretty loose. However, if you're caught violating any of the rules above, here's what will happen:

First offense: Warning by me or a moderator
Second offense: Banning for 1 day
Third offense: Banning for 3 days
Fourth offense: Banned permanently.

If you do something really dumb, or are just a troll, I will skip the warning and the temporary banning, and ban you permanently!

The rules are pretty cut and dry... However, if you have any questions about this policy, feel free to contact me.
See more
See less

Amtech nc559-v3-tf fake or original

Collapse
X
 
  • Filter
  • Time
  • Show
Clear All
new posts

    Amtech nc559-v3-tf fake or original

    Good Day.

    today i have received 3x30cc amtech nc559-v3-tf from their UK distributor.. the flux i received us orange in color which resembles to most of the fake fluxes.

    does anyone has seen the original flux or they may have already bought..? can you compare if the flux i received is authentic..?

    See picture please..

    https://files.fm/u/mh9va5ug7

    Best Regards
    Attached Files

    #2
    Re: Amtech nc559-v3-tf fake or original

    Mine is more clear/pale yellow and is genuine.
    Genuine Amtech smells nice when it gets hot.
    Where did you get yours from?

    Comment


      #3
      Re: Amtech nc559-v3-tf fake or original

      pretty sure there is no V3 from Amtech,
      also they put the label up near the rear and not centered.

      where did you buy it?

      Comment


        #4
        Re: Amtech nc559-v3-tf fake or original

        no v3
        https://www.inventecusa.com/amtech-data-sheets.html

        u.k. distributor
        PEP-CD

        7 Pigott Drive, Shenly Church End

        Milton Keynes MK5 6BX

        England
        Tel: +44 7863123446
        Email: pep-cd@hotmail.co.uk

        Comment


          #5
          Re: Amtech nc559-v3-tf fake or original

          I got mine from "pep-cd@hotmail.co.uk" I got UK distributor recommendation from Inventicusa when i wanted to order from then. they reffered me to their UK distributor and today i got the package and i saw this translucent orange colored flux. I dont know if its the original or some low quality. i just dont like this orange color. Does yours is also translucent..? man. this fake flux issue gives me always headaches. pay 34 euro per 30cc and then you receive some shit

          Comment


            #6
            Re: Amtech nc559-v3-tf fake or original

            no v3
            https://www.inventecusa.com/amtech-data-sheets.html

            if there is no V3 from Inventic.. then where is it came from. ? and why would their distributor sell it..?

            Comment


              #7
              Re: Amtech nc559-v3-tf fake or original

              Originally posted by stj View Post

              why did their distributor sells it if its not on inventic product list ..?

              Comment


                #8
                Re: Amtech nc559-v3-tf fake or original

                Originally posted by diif View Post
                Mine is more clear/pale yellow and is genuine.
                Genuine Amtech smells nice when it gets hot.
                Where did you get yours from?
                from pep cd. mentioned above. do you have this V3 ..? above other comment says no V3 according to inventic website product list...?

                Comment


                  #9
                  Re: Amtech nc559-v3-tf fake or original

                  i just got a reply from Inventec about my inquiry if its a legit flux or not. i sent the same picture to them. see picture for their reply to my email..
                  Attached Files

                  Comment


                    #10
                    Re: Amtech nc559-v3-tf fake or original

                    Northridgefix are Amtech distributors in the US and have this note on their website.
                    We are an official distributer and one of the largest resellers of Amtech Flux. Be careful buying Amtech flux off Amazon, eBay or Aliexpress or Amtech labeled as V3. It’s not genuine.
                    https://northridgefix.com/product/am...-needle-sizes/

                    Maybe it's a European thing?

                    Comment


                      #11
                      Re: Amtech nc559-v3-tf fake or original

                      Originally posted by diif View Post
                      Northridgefix are Amtech distributors in the US and have this note on their website.


                      https://northridgefix.com/product/am...-needle-sizes/

                      Maybe it's a European thing?

                      Ok its possible. . but why does Inventec employee replied to my email stating that its an original flux. our v3 version. eventhou i just did some soldering with it and it does reponds very wel. exellent wetting. long acting. where v2 burns and converts to black sot. it stays liquid and work.

                      soldered nuvoton nct6798D multicontrolller in one go with drag sodering. got 1 bridge so far.

                      Now the question is. if there is no V3 even exist.. then what is this Inventec and their distributor confirmed to be their latest flux and the did asked me to feedback on this flux

                      Any idea's ??

                      about the color. it seems to be orange. but its more like paul yellow. since its a 30cc tube thats why it gives more orange like tint.

                      Comment


                        #12
                        Re: Amtech nc559-v3-tf fake or original

                        Originally posted by diif View Post
                        Northridgefix are Amtech distributors in the US and have this note on their website.


                        https://northridgefix.com/product/am...-needle-sizes/

                        Maybe it's a European thing?
                        All confusion is cleared. I did received an original authentic product. Since Inventec sent an email that it is not yet officailly launched. But mess is made by AmtechDirect which they are dealing with. Northbridgefix is contacted about the new flux but they did not responded. says Invenec.

                        As for info on their site about the flux, He sent me a folder. In international site it is already mentioned but not on usa site since lazy updates.

                        Do anyone says no V3 is existed. Yes it is and there it is.. My confusion was also due to the no availability as bulk. Simply saying is still in trial.

                        As i said before. wetting is perfect. Causes no soot after prolonged heating. perfect for drag soldering. Just reballed RTX3090 and its amazing.. Got cleaned with isopropyl and board was looking like no flux is used.

                        All of this discussion was just out of curiosity but in real world the flux doperform very wel.

                        Thanks for all your time..

                        Cheers
                        Attached Files

                        Comment


                          #13
                          Re: Amtech nc559-v3-tf fake or original

                          https://amtechdirect.com/

                          Comment


                            #14
                            Re: Amtech nc559-v3-tf fake or original

                            Inventec stopped making NC-559-V2-TF in 2018 only made NC-559-ASM-TF with a label from NC-559-V2-TF, Amtech Direct restored the V2 formula and introduced the V3 which has nothing to do with Inventec.
                            There is a series of demonstration videos explaining the difference on Youtube and the difference between the products.
                            1 - https://www.youtube.com/watch?v=IG8_...nchusCreations
                            2 - https://www.youtube.com/watch?v=7ykY...nchusCreations

                            Comment

                            Working...
                            X