Getting no backlights with this one. Checked LED+ to chassis when plugging the TV in and the voltage spikes to 260ish then drops down to around 100 signaling to me it has an open LED circuit. Opened it all up, but all the LEDs turned on just fine.
Any suggestions where to go from here?
Edit: Guessing one of the LED cables wasn't secured all the way into the connector. Pushed it in when testing the LED voltages and now it seems to be working fine now.
Any suggestions where to go from here?
Edit: Guessing one of the LED cables wasn't secured all the way into the connector. Pushed it in when testing the LED voltages and now it seems to be working fine now.
Comment