Phillips 55PUS6561/12 EEPROM Bin file

[unimatrix93]

Hello there!

I'm looking for a EEPROM bin file for a Phillips 55PUS6561/12.
Chassis: QM16.3E_LA
Motherboard: 715G772-M01-B00-005K

Thanks in advance! 😊

[lotas]

Re: Phillips 55PUS6561/12 EEPROM Bin file

Hello there!

I'm looking for a EEPROM bin file for a Phillips 55PUS6561/12.
Chassis: QM16.3E_LA
Motherboard: 715G772-M01-B00-005K

Thanks in advance! 😊

Dump .bin what spi flash MX25L1605A?
I have from PHILIPS 49PUS6561 / 12.
Will it suit you?

[unimatrix93]

Re: Phillips 55PUS6561/12 EEPROM Bin file

Dump .bin what spi flash MX25L1605A?
I have from PHILIPS 49PUS6561 / 12.
Will it suit you?

My model has a MX25L1606E SPI chip, should I give it a try with your bin? 🤔

Thank you!

[lotas]

Re: Phillips 55PUS6561/12 EEPROM Bin file

Try:
Save your Dump just in case.

[unimatrix93]

Re: Phillips 55PUS6561/12 EEPROM Bin file

Try:
Save your Dump just in case.

Thank you Sir! 😊

I will try tomorrow and report back with the results.

[unimatrix93]

Re: Phillips 55PUS6561/12 EEPROM Bin file

So I reprogrammed the EEPROM with your bin file and the problem is still the same.

Backlight, display working with no data on it, no menu, nothing just blank screen with flashing red power led. ��

[William1967]

Re: Phillips 55PUS6561/12 EEPROM Bin file

Disconnect one of the flat cables between the t-con and display and see what happens, after that do the same with the other cable, don't forget to disconnect the power cable when you disconnect any of the cables. Make pictures and upload them here.

[unimatrix93]

Re: Phillips 55PUS6561/12 EEPROM Bin file

Disconnect one of the flat cables between the t-con and display and see what happens, after that do the same with the other cable, don't forget to disconnect the power cable when you disconnect any of the cables. Make pictures and upload them here.

Sorry for the late reply but I was away during the weekend.

Left flat cable disconnected:

Right flat cable disconnected:

Both disconnected


Thanks for your help!

[William1967]

Re: Phillips 55PUS6561/12 EEPROM Bin file

Try this: press 062598 HOME followed by the 3 digit code you find on the rear.

[unimatrix93]

Re: Phillips 55PUS6561/12 EEPROM Bin file

Try this: press 062598 HOME followed by the 3 digit code you find on the rear.

So I pressed the key sequence and the TV turned off after a few seconds.

[William1967]

Re: Phillips 55PUS6561/12 EEPROM Bin file

And what happens when you switch the tv on again?

[unimatrix93]

Re: Phillips 55PUS6561/12 EEPROM Bin file

I made a video for you about the whole procedure.

https://www.youtube.com/watch?v=OYD7yCxzAes