I have an 'unreliably operating' Dell 9200C in for evaluation. Circa 2007 I think. I've found a few bloated and leaking caps that need replacing, all the others "appear" OK.
The scenario is as usual, small form factor case with all the components crammed together. All the vents blocked up with enough fluff and dust to choke a horse.
Bad list
4x Rubycon 6.3V - 2200uF MCZ series
4x Rubycon 6.3V - 220uF says ZA - (ZL?) series
I'm having a job finding close electrolytic replacements, can anyone help please, I've spent over an hour searching and no real result I can confidently order.
I DID come across these in Poly, do you think these would be OK ? I'm still new to this level of repair and after reading posts regarding matching poly to electrolytic I'm not sure I'm getting it right.
PLG0E222MDO1 by Nichicon for the 2200's
647-RR70J221MDN1 by Nichicon for the 220's
Many thanks
The scenario is as usual, small form factor case with all the components crammed together. All the vents blocked up with enough fluff and dust to choke a horse.
Bad list
4x Rubycon 6.3V - 2200uF MCZ series
4x Rubycon 6.3V - 220uF says ZA - (ZL?) series
I'm having a job finding close electrolytic replacements, can anyone help please, I've spent over an hour searching and no real result I can confidently order.
I DID come across these in Poly, do you think these would be OK ? I'm still new to this level of repair and after reading posts regarding matching poly to electrolytic I'm not sure I'm getting it right.
PLG0E222MDO1 by Nichicon for the 2200's
647-RR70J221MDN1 by Nichicon for the 220's
Many thanks
Comment