Hello there.
I have this curved samsung tv with power board BN44-00780A that has a blown fuse.
I found a ceramic cap burned (CP814). Replaced them and now I get 3.3V Standby, 176V on filter cap but nothing else.
I only brought the power board to my shop and I'm not sure if this power board needs from main board to fully activate or if I still have more problems since I'm not getting 450v on filter cap. Any thought?
Here are the pins that have voltage:
PS ON/OFF = 3.3v
A5V = 5V
Everything else is 0V
Thank you.
I have this curved samsung tv with power board BN44-00780A that has a blown fuse.
I found a ceramic cap burned (CP814). Replaced them and now I get 3.3V Standby, 176V on filter cap but nothing else.
I only brought the power board to my shop and I'm not sure if this power board needs from main board to fully activate or if I still have more problems since I'm not getting 450v on filter cap. Any thought?
Here are the pins that have voltage:
PS ON/OFF = 3.3v
A5V = 5V
Everything else is 0V
Thank you.
Comment