Flashing green light. No picture. All the caps were CapXon.
The three bulging caps were 470uf 25v reading between 3 and 7 ohms esr. The big 100uf 400v cap had a slight bulge but was open.
Cap list
KF series: mfr spec qty
470uf 25v 10mm x 16mm ripple=1200 imp= .076 5
470uf 10v 8mm x 12mm ripple=580 imp= .25 1
KM series:
100uf 400v 18mm x 35.5mm ripple=550
I replaced the KF series with Nichicon PW, same sizes and spec.
The KM series I used a Nichicon PB that was 18mm x 40mm.
There was a small cap that looked like a 22uf 25v that was covered in glue that I left in.
The three bulging caps were 470uf 25v reading between 3 and 7 ohms esr. The big 100uf 400v cap had a slight bulge but was open.
Cap list
KF series: mfr spec qty
470uf 25v 10mm x 16mm ripple=1200 imp= .076 5
470uf 10v 8mm x 12mm ripple=580 imp= .25 1
KM series:
100uf 400v 18mm x 35.5mm ripple=550
I replaced the KF series with Nichicon PW, same sizes and spec.
The KM series I used a Nichicon PB that was 18mm x 40mm.
There was a small cap that looked like a 22uf 25v that was covered in glue that I left in.
Comment