Re: Mangavox 50ME314V/F7 "Funai junk"
Well, the schematic I provide is to be used as the guide only to see what the typical Voltages should be not the exact as how the Voltages are generated.
To me, that standby AL+3.3V should always be present with or without the main board connected since it is the standby Voltage after all.
Well, the schematic I provide is to be used as the guide only to see what the typical Voltages should be not the exact as how the Voltages are generated.
To me, that standby AL+3.3V should always be present with or without the main board connected since it is the standby Voltage after all.
Comment