Intermittent Led Great ! 42LV4500

Collapse
X
Collapse
 
  • Page of 1
  • Time
  • Show
Clear All
new posts
Previous template Next
  • ReeceyBurger123
    Never Give Up !
    • May 2014
    • 7325
    • Britain
    #1

    Intermittent Led Great ! 42LV4500

    Ahh another classic example of Led trash, this on will run the back lights and fail after they heat up. Looking at the Led return line one of the Led strips is going intermittent as the return voltage drops very low then the protection circuit engages and shuts down the backlight.

    Going to tear this apart tomorrow and find out whats going on, seen this type of failure on a Lg smart Led tv was a bitch to diagnoses the faulty Led or could be a lose wire never know ehy will let you know.
    Please Do Not PM My Page Asking For Help Badcaps Is The Place For Advise, Page Linked For Business Reasons Only. Anyone Doing So Will Be Banned Instantly !

    https://www.facebook.com/Telford-Tel...7894576335359/
    Tags: None
    • ReeceyBurger123
      Never Give Up !
      • May 2014
      • 7325
      • Britain
      #2
      Re: Intermittent Led Great ! 42LV4500

      Just an update:

      I found the led which was causing the issue, it visibly was partially cracked and when frozen with freeze spray would light. I replaced it with one from another smashed set and works great Anyone else had this issue ?
      Please Do Not PM My Page Asking For Help Badcaps Is The Place For Advise, Page Linked For Business Reasons Only. Anyone Doing So Will Be Banned Instantly !

      https://www.facebook.com/Telford-Tel...7894576335359/

        Comment

        • ReeceyBurger123
          Never Give Up !
          • May 2014
          • 7325
          • Britain
          #3
          Re: Intermittent Led Great ! 42LV4500

          Boost, wondering if anyone else has had an intermittent Led ?
          Please Do Not PM My Page Asking For Help Badcaps Is The Place For Advise, Page Linked For Business Reasons Only. Anyone Doing So Will Be Banned Instantly !

          https://www.facebook.com/Telford-Tel...7894576335359/

            Comment

            Previous template Next

            Related Topics

            Collapse
            • Sus256
              HISENSE 65E7KQ PRO - no boot
              by Sus256
              Hi all!

              HISENSE 65E7KQ PRO
              RSAG7.820.13512 - chassis
              MT9618BAATAB - cpu
              RSAG7.820.12059 - power
              HD650Y3U77 - panel
              KLM8G1GETF - emmc

              The TV does not turn on, the standby indicator is on. All voltages are present.
              Emms is dead. Not readable, not detected.
              Replaced emmc.
              But with another dump there is no launch

              Terminal log

              UART
              <
              AC_ON
              RPMB key is not yet programmed

              HASH1_VERSION=0x00000000 64bit
              E-B
              FDE enabled
              layout pattern onebin by SAR7,0...
              06-01-2025, 02:11 AM
            • protocold
              MacBook Pro 15" 2010 820-2850 intermittent charging
              by protocold
              I would like to get some help on a 820-2850 logic board with intermittent charging problem. Sometimes the battery will charge all the way and sometimes magsafe would be cycling between green and orange.

              I have already tried replacing dc-in board, swapping good battery, swapping genuine 85w chargers. None of that helps..

              when it is not intermittent:
              PPVBAT_G3H_CHGR_R is 12.07v

              when it is intermittent:
              When the light is green, PPVBAT_G3H_CHGR_R is 12.99v
              when the light is orange, PPVBAT_G3H_CHGR_R is 11.62v

              data line on the battery...
              07-25-2025, 08:18 PM
            • neilc6
              Sold Sharp LC-50LB370U Board on Ebay - Return Requested
              by neilc6
              Sold this board on ebay with this warning in the description and pic of working TV.

              "Pulled from a TV with a damaged panel. NO REFUNDS.
              This model suffers from LED backlight failures. Make sure your backlights are working before replacing boards. Symptom is TV turns on and off with no backlight or a flash of backlights."

              Ebay Return Request
              Reason for return - Doesn't work or defective
              Details - Powersupply board has sound,but verry dark screen.I would like to return,You send for me another one. Thank You.

              With ebay, if...
              07-16-2021, 04:00 PM
            • CDNBrewer
              Running out of Ideas, hoping someone smart can provide some for my ONKYO TX-SR353 Receiver
              by CDNBrewer
              Hello Everyone,

              I have an Onkyo TX-SR353 Audio/Video Receiver (5.1 ch with HDMI) that I am having a really hard time diagnosing and I'm about to throw this in the junk and go buy a new unit that is on sale until the 7th.

              Symptoms:
              • Intermittent (part of the reason why i'm having a hard time isolating problem), sometimes will work for 10+h at a time without issue
              • Original symptom was wife reported loud banging noise (like someone was banging on the wall with their fists) from the LEFT SURROUND speaker and then the unit shut off.
              • I swapped the Left and Right surround
              ...
              08-05-2025, 09:29 PM
            • Zippo978
              Telefunken te43550b40q2k intermittent backlight
              by Zippo978
              Good morning everyone

              I have this Telefunken te43550b40q2k TV that has intermittent backlighting, sometimes it turns on and then does not turn back on.

              I tested the LED bars and all three work, not even one burned LED, then I tried to put only two bars short-circuiting the end of the connection cable and it does not give any problem the LEDs stay on without problems, I also tried short-circuiting the central connector and the initial one, always no problem, but as soon as I put the third bar, no matter the position the problems start again.

              Thanks in advance...
              09-04-2024, 01:35 AM
            • Loading...
            • No more items.
            Working...