Problem with power button connector i have the schematic but i cant find where i can make a jumper becase i broke the board connections.
Attached Files
-
-
Re: Toshiba Satellite C650D
That photo is blinded by the flash. Is that on main board or power button board?Galaxy S6 Edge x2 (Gold&White)
Asus GL552VW-i7 6700HQ|GTX 960M|15.6"FHD|16GB DDR4|512GB M.2 SSD+1TB SSD
Clevo W230SD - i7 4710MQ|GTX960M|13"QHD+|16GB DDR3L|500GB+256GB mSATA SSD+1TB HDD
Try Harder! -
Re: Toshiba Satellite C650D
That is the main board.sorry for the flash.Attached FilesComment
-
-
Re: Toshiba Satellite C650D
still same image, slide to a different angle to eliminate flashComment
-
Re: Toshiba Satellite C650D
And why do you post a photo of the LVDS connector? You need to find CN200.Comment
-
Re: Toshiba Satellite C650D
Stay near a lamp and disable the flash.
if the cam or cellphone has good ISO you don`t need lamp.Just cook it! It's already broken.Comment
-
Re: Toshiba Satellite C650D
That part is missing i need to make a jumper for that i cant connect it there.Attached FilesComment
-
-
Re: Toshiba Satellite C650D
Can you please post complete model, schematics and number of pins in CN200?Galaxy S6 Edge x2 (Gold&White)
Asus GL552VW-i7 6700HQ|GTX 960M|15.6"FHD|16GB DDR4|512GB M.2 SSD+1TB SSD
Clevo W230SD - i7 4710MQ|GTX960M|13"QHD+|16GB DDR3L|500GB+256GB mSATA SSD+1TB HDD
Try Harder!Comment
-
Re: Toshiba Satellite C650D
One of the pads is connected to KBC and the other is ground. For ground you can use the wire you have soldered. For the signal you have to scrape the green protective to reveal the line or you can solder it to D200 from the opposite site to ground (One side of D200 is to the ground.)Comment
Comment