View Single Post
Old 09-30-2010, 02:55 PM   #61
PlainBill
Badcaps Veteran
 
PlainBill's Avatar
 
Join Date: Feb 2009
City & State: Phoenix, AZ
My Country: USA
Line Voltage: 120VAC 60Hz
I'm a: Hobbyist
Posts: 7,013
Default Re: Sony Bravia no picture but backlight on

Quote:
Originally Posted by BCR View Post
The cable is good, it is a 1 meter cable that I use everyday on the PS3 straight to other TV, but I did try a second cable to be sure. As well, went around every board on TV and checked connections, all look good (some grease, but that is standard).
It doesn't have to be a connector. Lead free solder is notorious for prodicing joints that look good, but are intermittent. When you plugged in the cable you put pressure on the circuit board, causing it to flex slightly. That caused two points to rub across one another and make contact - at least for a while.

The explanation is easy. Finding the bad solder joint is the hard part. The good news is the harder it is to find, the greater your sense of accomplishment when you succeed.

PlainBill
__________________
For a number of reasons, both health and personal, I will no longer be active on this board. Any PMs asking for assistance will be ignored.

Never be afraid to try something new. Remember, amateurs built the ark. Professionals built the Titanic.
PlainBill is offline   Reply With Quote