Hi. Will it work if we do "HM55 HM65 ........ (BD82HM55 etc.)" reball? Or is it a waste of time?
-
Hi all,
since my second device of this model number now died due to Canon being service unfriendly, I'd like to reset the counter myself.
This model of printer seems to be on non of the eBay sellers and other suppliers support lists for the Canon Service Tool. Other forums suggested the v5103 version of the tool, which did not work unfortunately.
Has anyone maybe experience with this exact model?
Thank you!07-02-2025, 07:46 AM -
hello
have this GTX780 with shifted/bad colors. i try MATS and it show some errors on ic A1. i do proper reflow BUT colors still the same and add some distortion on picture. do MATS and it shows NO ERRORS
so i do reball and now everything works ok.
SO DONT DO REFLOW. DO ONLY REBALL!!!
but still no HDMI and DP, Only both DVI. Have anybody clue what to check? -
Hi Anyone has dump from working canon mg2555s i got error 5B00
I would like to try flash eeprom witch ch341a09-14-2024, 04:25 AM -
Hi,
Does anyone have the absorber reset software for the Canon MG3650S?
thx -
Hi guys
How do I reball a BGA like this one that has capacitors on it? Obviously my usual technique of dragging a solder ball around with my iron, then cleaning with small strips of braid is not going to work
I removed another one of these GPU today as it was testing faulty measuring resistances on board - I decided to clean that one up for 'practice' and did not even notice all the capacitors under the sticky flux.
It's only when I kept hitting something 'gritty' while I was trying to clean he centre area of the BGA that I cleaned all the flux off...
Comment