blown resistors? How to identify

techbrat

Member

Join Date: Nov 2009

Posts: 13
#1

blown resistors? How to identify

12-12-2009, 09:31 PM

blown resistors? How to identify

I blew 3 resistors on a board.

The resistor is gone so I do not see the color code. This is a honeywell pilot part.

I have no idea how to identify the resistor or get a schematic.

Honeywell Part REV. B 97-2815
intermittent pilot
Tags: None

Previous template Next

20v / 2A SMPS for a Battery Charger - Explanation of Blown Resistors Please..

by reessi

Hello,

My friend asked me to replace the wire going from this SMPS 20v adapter to the charger for a 18v Lithium Battery for a drill.

The cable had frayed and been touching, as a result the 5 Paralleled R200 (0.2 ohm) resistors had blown O/C, they are connecting the main -ve rail to the output wire.

The output was jumping around 13v and dis-appeared when a load like the charger was connected, they measured 900ohms.

I experimented by replacing at first a single 0 ohm and then a 2.2ohm in and the output was restored at 21.62v and 21.65v respectively...
- Channel: Troubleshooting Power Supplies and Power Supply Design
08-22-2024, 08:12 AM
Please identify the broken blown component dell precision 3520 la-e153p

by LaptopSugar

Please identify the broken blown component. The pictures and schrmatic are attached. The 5 pin nextdoor refers to the dc cable. I think iy is the 1000p 50 0603 v7 cap but im not sure. Am i correct. the images are attached pleas help
The images followthe first is thebroken conponent, rhe second another board, the third the schematic, idought itsthe yello highlighted one on left...
- Channel: Troubleshooting Laptops, Tablets, and Mobile Devices
06-25-2024, 04:23 AM
HUAWEI DAH98NMB8C0 identify 2 resistors

by misha97123

Hello everyone, please help to identify resistors on photo. I think left resistor= 10mohm, right resistor=10kohm

2 Photos
- Channel: Troubleshooting Laptops, Tablets, and Mobile Devices
01-19-2024, 10:46 PM
Blown heated blanker controller. Trying to figure out these smd resistors

by Widget

Hello,

We have one of those heated throw blankets you plug into AC power. The other day it went *bzzzbzzzbbzz... pop*, so I opened it up to find what appears to be two resistors gone *poof*. (R7 & R14 in picture)

luckily, we have a second blanker with what appears to be identical controller, so I opened it up to take a picture

According to the good controller PCB, R7 = 9531, & R14 = 103

Online SMD resistor calculator says

R7 - 9531 = 95.3kohm
R14 - 103 = 10kohm

Is this correct? Would all I need is a 10k...
- Channel: Troubleshooting Appliances and other Household Electronic Stuff
06-30-2024, 11:22 AM
Schematic vs. Reality: Where Are the Resistors on My Sharp Clock Radio? Model FY-70CH

by TinkerTron

Hey everyone,

I'm currently working on a mid-70s Sharp Electronic Digital Clock Radio, Model FY-70CH. I found the service manual online, printed it out, and have been studying it for a while. My main reasons for tackling this are: (1) I want to learn electronics and figured I'd start with something I had on hand, and (2) I want to fix its issues. Right now, the radio sounds awful, has about 5V DC at the speaker terminals, and the alarm time setting doesn't work. But I'm not asking how to fix these problems.

Instead, here's what's been bugging me so far:
The schematic...

3 Photos
- Channel: Troubleshooting Audio Equipment
03-06-2025, 02:03 PM
Loading...
No more items.

blown resistors? How to identify

blown resistors? How to identify

Related Topics