Strip video, keep audio?

Collapse
X
 
  • Time
  • Show
Clear All
new posts
  • Hondaman
    Badcaps Legend
    • Sep 2008
    • 1095
    • USA

    #1

    Strip video, keep audio?

    Can anyone recommend good software (Win7/Linux) to strip the video from my dash cam footage, and create an audio file? I'd like to e-mail some pieces of audio to my mother. She has an old car like I do (she has a 2004 Chevrolet 2.2L, I have 2002 Saturn 1.9L). She needs to know what a whining power steering pump sounds like, since older systems often develop leaks, which can lead to damage and accidents. I told her it was whining "like that American professional tennis brat John MacInroe from 45 years ago", but I was being cheeky. That does not really describe what it sounds like.

    What software should I use for this?
  • m1ch43lzm
    Badcaps Legend
    • Mar 2019
    • 1191
    • Peru

    #2
    Good old FFmpeg should do the trick, you can also use VLC to "convert" the video to an audio file
    Audacity if you need to edit audio after extracting it
    But I'm not sure if your dashcam mic is that sensitive to engine noises, when Installed on the windshield behind the rear view mirror...
    Last edited by m1ch43lzm; 12-06-2025, 10:33 PM.

    Comment

    • Agent24
      I see dead caps
      • Oct 2007
      • 5112
      • New Zealand

      #3
      I've opened video files in Audacity and it just extracts the audio.
      "Tantalum for the brave, Solid Aluminium for the wise, Wet Electrolytic for the adventurous"
      -David VanHorn

      Comment

      Related Topics

      Collapse

      • samson7point1@yahoo.com
        Help troubleshooting an audio problem with an RCA SGT-250 CED Player
        by samson7point1@yahoo.com
        The Problem: This player has a toggle switch to select between Stereo, Mono R, and Mono L. Regardless of the setting it outputs the sound to both the L&R audio jacks. In the Mono R position, the audio output level is normal (from both the L and R audio output jacks), in the Stereo position the audio output is about half the volume, and in Mono L, it's about 3/4 the volume. Something about putting it into Stereo mode is causing the volume to drop significantly and I can't figure it out.

        The player processes the audio signal using two different reference frequencies. The "R"...
        04-30-2024, 11:22 AM
      • Hakuu
        LG OLED77G1PUA - No Video / Audio after a TCON Board change and Software Update
        by Hakuu
        Hi There,

        This TV was auto switching off after few seconds with some vertical lines on the screen, so got a new TCON board and replaced it.

        After replacing the TCON board it was working fine and i set it up with everything, used for few hours, then had the bright idea to update the software on it. During the update process, TV switched off and now no audio or video. No relay switch sound.

        More Details

        TV Model - LG OLED77G1PUA

        Got the same exact TCON board from TVPartsToday and replaced it. But didnt transfer the EPPROM data (didnt...
        07-12-2023, 02:37 PM
      • edugimeno
        Finding the wrong part at a loooong led strip, part works fine, part flickers, all parallel...
        by edugimeno
        Hi There!
        I'm trying to help my friend who owns a restaurant be just bought.
        He has a very long LED strip running along all the walls and columns. The strip is attached facing down 2in above the floor, using a wall panel that ends in a metal rail that finishes the panel underneath
        It's stuck using, I guess, the 2 sided tape that comes with the strip
        The issue is that like 1/2 of the full length, including 1/2 one wall, another entire wall, and one column, flickers after 4 or 5 minutes ON. Particularly it flashes staying OFF most of the time and flashing ON for 1 tenth...
        09-05-2024, 09:34 AM
      • ItepK
        Panasonic TX-P42G30E green light blinking, no video, no audio
        by ItepK
        Hey everyone!

        I've gotten this TV for free, neither have it seen a TV repair man, neither have it been opened before.

        This post describes my entire troubleshooting process of this TV.

        When I turn it on using the ON/OFF switch at the side of the TV, the light rapidly flashes green, then it stays on, but it does not react to any of the remote buttons, side buttons, and doesn't play audio.

        I've taken the unit apart, and I've started to check some voltages:

        • On the P11 connector, there is 15V DC only for a brief moment, then it goes
        ...
        12-22-2023, 05:06 AM
      • kotel studios
        Lantec PULSE 386 subwoofer - no audio output
        by kotel studios
        Hi

        I have this Lantec PULSE 386 subwoofer I got a while back laying around awating repair for quite some time. Sadly it's missing it's original speakers which it came with.
        After plugging in the mains, the LED on the volume controller lights up. When I plug in the 3.5" jack cable to my soundcard (confirmed to work), I get no audio on the subwoofer (nor the speaker jack at the back).

        The PCB is quite simple. There is a UTC4558 amp and two D6282 audio amps. When I put my finger on the UTC4558 I can see and hear the speaker "fart". Although, the left...
        11-29-2025, 04:15 AM
      • Loading...
      • No more items.
      Working...