Epic P4 Overclock

Collapse
X
Collapse
 
  • Page of 3
  • Time
  • Show
Clear All
new posts
Previous 1 2 3 template Next
  • shovenose
    Send Doge Memes
    • Aug 2010
    • 6575
    • USA
    #41
    Re: Epic P4 Overclock

    Muahaha.... I'm running the P4 at 4.00GHz it works

    Well, it works sort of. I can get it to pass POST about 1 in 10 tries, and while the computer runs fine P95 errors out immediately, so I used some stupid online thing to bring up the CPU load so speedstep would go the heck away and took a picture of the 4GHz... (uploading soon)

    The voltage is set to 1.400V in the BIOS but I think this motherboard has trouble maintaining that.
    Attached Files
    Last edited by shovenose; 06-25-2012, 04:54 PM.

      Comment

      • RJARRRPCGP
        Badcaps Legend
        • Jul 2004
        • 6304
        • USA
        #42
        Re: Epic P4 Overclock

        Originally posted by kc8adu
        had a pentium d 805? 2.6? running at 4.1ghz for several years 24/7.folding,ect all that time.
        ran hotter than a blast furnace.5 pound copper heatsink and 120mm fan.
        I heard that Bloomfield may be the hottest. (First gen Core i7)
        (Especially the i7 920) I think you're lucky to get 4.1 on an i7 920.

        80 C at full load is reportedly common with Bloomfield.

        Sandy Bridge seems to scale better.
        And Ivy Bridge is supposed to be better than Sandy Bridge, but there's been reports of having higher core temps than Sandy Bridge and Intel switching from solder for the IHS contact to paste for the IHS contact.
        Last edited by RJARRRPCGP; 06-25-2012, 05:49 PM.
        ASRock B550 PG Velocita

        Ryzen 9 "Vermeer" 5900X

        32 GB G.Skill RipJaws V F4-3200C16D-32GVR

        Arc A770 16 GB

        eVGA Supernova G3 750W

        Western Digital Black SN850 1TB NVMe SSD

        Alienware AW3423DWF OLED




        "¡Me encanta "Me Encanta o Enlistarlo con Hilary Farr!" -Mí mismo

        "There's nothing more unattractive than a chick smoking a cigarette" -Topcat

        "Today's lesson in pissivity comes in the form of a ziplock baggie full of GPU extension brackets & hardware that for the last ~3 years have been on my bench, always in my way, getting moved around constantly....and yesterday I found myself in need of them....and the bastards are now nowhere to be found! Motherfracker!!" -Topcat

        "did I see a chair fly? I think I did! Time for popcorn!" -ratdude747

          Comment

          Previous 1 2 3 template Next

          Related Topics

          Collapse
          • eccerr0r
            Do people still overclock?
            by eccerr0r
            Yeah it's free speed, but do people generally still overclock their computers risking instability, using more power/cooling, etc. or have people simply accepted stock speeds or perhaps it's pretty much impossible to overclock in general because CPUs are already at its limits, or perhaps it's not possible without surgery, ridiculous cooling, or signed firmware hacks nowadays?

            Wondering if I should run my 2.67GHz C2Q at 3 or 3.2GHz and risk instability or corruption during the summer months as it's nice and cool now during the winter...
            03-01-2021, 12:22 PM
          • vicenteeus2022
            schematic of the motherboard IPM31 -LGA775 Rev:1.03
            by vicenteeus2022
            HELO, please I would like to know if anyone has a schematic of the motherboard IPM31 -LGA775 Rev:1.03
            05-07-2022, 02:38 PM
          • Retrorockit
            Universal LGA775 VID mod question.
            by Retrorockit
            I've been studying the VRD11 Voltage tables for the Core 2 Duo family of CPUs on LGA775. I found a number of settings that involve all VID pins=0 but one.
            This could be done playing around with tinfoil to pull them all low, and then tape the desired pin HI to get the desired Voltage range. I call it a range because I intend to adjust it lower as needed with Throttlestop under clocking software.
            the advantage of pulling all VID LO would be that you don't need to know the original Voltage of the CPU. Just do the mod and run it.
            It has occurred to me that since they will all be...
            01-15-2022, 08:24 AM
          • satabell
            [REQUEST] Razer Blade 15 [2020] RZ09-0328x Overclock menu Unlock
            by satabell
            Razer Blade 15” (2020) - Base Model | RZ09-0328x
            CPU - i7-10750H
            GPU - RTX 2060
            https://mysupport.razer.com/app/answers/...8x-support

            BIOS DUMP:



            I tried Neoprogrammer v2.2.0.10 and AsProgrammer V2.1.0.13, using the CH3141 3.3v mod.

            All i'm getting a black screen ( keyboard lights up)

            Thank You,
            12-16-2022, 07:23 PM
          • ChaosLegionnaire
            sse4.1 issue with harpertown xeon lga775 mod
            by ChaosLegionnaire
            i ordered a modded lga775 xeon x5470 from china and it arrived last week and i only got to testing it yesterday. i put the cpu in my gigabyte ep35-ds3r motherboard whose chipset can support the cpu.

            however, when i fired up cpu-z to check the cpu specs, i noticed that sse4.1 was missing from the list of instructions on the cpu. i attached an image of the problem. i checked wikipedia and it says the harpertown xeons do support sse4.1.

            so i wanna ask if this is just a cpu-z display problem or is it a bios/os/microcode issue of using modded lga771 cpus in an lga775 board?...
            03-07-2020, 10:43 PM
          • Loading...
          • No more items.
          Working...