Help identifying a capacitor

Collapse
X
 
  • Time
  • Show
Clear All
new posts
  • techcaps45
    New Member
    • Jun 2009
    • 7

    #1

    Help identifying a capacitor

    Does anyone know what this cap is?

    224J DH
    400SA H
  • Wizard
    Badcaps Legend
    • Mar 2008
    • 2296

    #2
    Re: Help identifying a capacitor

    220nF 400V poly film cap.

    Is it a box or dipped body style, otherwise is it a SMD rectangular?

    Cheers, Wizard

    Comment

    • fireborne
      New Member
      • Jan 2011
      • 1

      #3
      Re: Help identifying a capacitor

      Can some please confirm that cap [green dipped] (224J DH 400 SA H) is indeed a "220nF 400V poly film cap"?
      Thx!

      Comment

      Related Topics

      Collapse

      • Prolog
        RTX 3080 FE Identifying capacitor
        by Prolog
        Hi people, I hope this is the correct spot to post this, I'm new to the forum.

        I have an RTX 3080 Founders Edition which has a burnt up capacitor (it was in parallel with another capacitor which appears damaged too), so I am hoping to be able to identify the capacitor values and order replacements.

        I hope these photos make it clear which component I am referring to:
        (yes, the soldering is a bit botched from removing the blown one, I know)

        I have found the board schematic (attached), but there does not seem to be a boardview available. I have never...
        12-01-2024, 08:27 PM
      • MORETTIGIAN
        Capacitor detached from PCB – RTX 2070 Super Founders Edition
        by MORETTIGIAN
        Title:
        Capacitor detached from PCB – RTX 2070 Super Founders Edition

        Description:
        During maintenance on an RTX 2070 SUPER Founders Edition, I found a capacitor lying on my desk after reassembly.
        I did not notice it detaching, so I am unsure of its original location on the PCB.

        Procedure performed:
        - Removed backplate
        - Cleaned heatsink and PCB with isopropyl alcohol + soft ESD brush
        - Reapplied thermal compound
        - Reassembled card

        Observed behavior after reassembly:
        - GPU powers on and operates normally under...
        09-18-2025, 12:14 PM
      • Ambro
        Help identifying missing smd capacitor for HP elitebook 840 g3
        by Ambro
        In an unfortunate mishap while attempting to read from the bios chip, one of the smd capacitors took flight and disappeared.

        I'm not sure how crucial this smd capacitor is, but it was a brown possibly ceramic one with no notable markings on it anywhere.

        I've attached a picture of where it's located on the board.



        Does anyone have an HP elitebook 840 g3 who might be able to aid me identifying this component. I'm not sure how crucial it is, but didn't want to risk it.

        Thank you for any help you can provide....
        09-09-2023, 06:21 PM
      • grimacelord
        Need Help Identifying Capacitor On Kar-Tech Versa Remote
        by grimacelord
        Hello,

        I have sort of a weird one here. This is the circuit board for a Kar-Tech VERSA remote. It's a wireless transmitter for crane and other heavy equipment.

        One of the capacitors have blown and I need help finding a replacement. The capacitors are 11.4mm x 6.6mm in size and the only imprint on them is "200mΩF", which I am assuming means 200 microfarads. There is no other markings on them. I have tried doing some searching on digikey and mouser, but I can't seem to find anything like this on there or I am inputting the wrong search parameters....
        09-08-2023, 09:28 AM
      • krob80
        PS5 Edm-010 No Power - Help identifying missing capacitor
        by krob80
        Hey everyone. I recently acquired a PS5 that is not turning on (no beep/power). PSU is good and there is no shorting on the 12V rail.
        It came with a Gen3 SSD installed so I feel that things went down hill for the previous owner when it was installed. F7003 was blown but there was nothing shorting to ground. I replaced the fuse but still no power (new fuse is still good for now).
        When connecting it to a bench power supply, it only pulls 10 mA (doesn't spike when first connected).
        I noticed that there are a couple capacitors missing from the Vcore power regulator (pictures attached)....
        05-15-2025, 04:24 PM
      • Loading...
      • No more items.
      Working...