I know that many of you can probably choose a perfectly good replacement out of a box of loose caps by just by feel …
But can you hold a noob's hand a bit?
On the (approx) 11mm height x 5.3mm diameter cap is:
ELNA, RJG, 10V, 100uF, (M), CE105˚C, 0602, (S)
ELNA website no longer shows an RJG series. Overwhelmed by choices and options at places like DigiKey. Would any of the many seemingly close ones work?
Even if scrounging locally, from what I'm getting around here: = or a bit higher V is OK, try for closer but no lower uF, and = or better tolerance and temperature; not sure about other parameters like ripple and low-hi impedance; and "good" brand is always preferred, even though it might cost 10X more than an $0.08 generic.
Thanks.
But can you hold a noob's hand a bit?
On the (approx) 11mm height x 5.3mm diameter cap is:
ELNA, RJG, 10V, 100uF, (M), CE105˚C, 0602, (S)
ELNA website no longer shows an RJG series. Overwhelmed by choices and options at places like DigiKey. Would any of the many seemingly close ones work?
Even if scrounging locally, from what I'm getting around here: = or a bit higher V is OK, try for closer but no lower uF, and = or better tolerance and temperature; not sure about other parameters like ripple and low-hi impedance; and "good" brand is always preferred, even though it might cost 10X more than an $0.08 generic.
Thanks.
Comment