Manufacturers logo looks like "no entry" sign

Collapse
X
 
  • Time
  • Show
Clear All
new posts
  • Cubrilo
    New Member
    • Jun 2011
    • 3

    #1

    Manufacturers logo looks like "no entry" sign

    Please help me identifying manufacturer of these capacitors (assume Taiwanese). They are metalized film.
    Regards.
  • Toasty
    Badcaps Legend
    • Jul 2007
    • 4171

    #2
    Re: Manufacturers logo looks like "no entry" sign

    Photos.

    Please use the "Go Advanced" button below and post them as attachments, not inline or linked to an offsite photo site.
    veritas odium parit

    Comment

    • Agent24
      I see dead caps
      • Oct 2007
      • 4953
      • New Zealand

      #3
      Re: Manufacturers logo looks like "no entry" sign

      Yes, post photos of them, or if you can't, use paint etc and draw a picture.

      Write down all the codes written on the capacitor also.
      "Tantalum for the brave, Solid Aluminium for the wise, Wet Electrolytic for the adventurous"
      -David VanHorn

      Comment

      • Krankshaft
        Badcaps Legend
        • Jan 2007
        • 2328
        • USA

        #4
        Re: Manufacturers logo looks like "no entry" sign

        No entry? The cap may be manufactured by the Ghostbusters for all I know .

        Post pics please.

        Last edited by Krankshaft; 07-20-2011, 06:52 AM.
        Elements of the past and the future combining to make something not quite as good as either.

        Comment

        • Cubrilo
          New Member
          • Jun 2011
          • 3

          #5
          Re: Manufacturers logo looks like "no entry" sign

          Very sorry guys, I was on the vacation.
          Here is the photo
          Attached Files

          Comment

          • alessioblaupunkt
            Senior Member
            • Aug 2010
            • 50

            #6
            Re: Manufacturers logo looks like "no entry" sign

            22*10^5 = 2200000 pF = 2.2 uF

            K= +/- 10%

            2.2uF +/- 10% 450V MKP or other type
            Brand = I don't know

            Use TDK/Epcos or WIMA or RIFA, they make high quality caps.

            Comment

            • Cubrilo
              New Member
              • Jun 2011
              • 3

              #7
              Re: Manufacturers logo looks like "no entry" sign

              Grazie per la risposta.
              I have additional question: why these epoxy resin coated capacitors are used, why not plastic case like e.g. X2 types?

              Comment

              • Agent24
                I see dead caps
                • Oct 2007
                • 4953
                • New Zealand

                #8
                Re: Manufacturers logo looks like "no entry" sign

                Cost saving probably?
                "Tantalum for the brave, Solid Aluminium for the wise, Wet Electrolytic for the adventurous"
                -David VanHorn

                Comment

                Related Topics

                Collapse

                • Document Archive
                  HP Z1 Entry Tower G5 i7-9700 Specification for Upgrade or Repair
                  by Document Archive
                  This specification for the HP Z1 Entry Tower G5 can be useful for upgrading or repairing a desktop PC that is not working. As a community we are working through our specifications to add valuable data like the Z1 Entry Tower G5 boardview and Z1 Entry Tower G5 schematic. Our users have donated over 1 million documents which are being added to the site. This page will be updated soon with additional information. Alternatively you can request additional help from our users directly on the relevant badcaps forum. Please note that we offer no warranties that any specification, datasheet, or download...
                  09-12-2024, 02:30 PM
                • Document Archive
                  HP Z1 Entry Tower G5 i7-9700 Specification for Upgrade or Repair
                  by Document Archive
                  This specification for the HP Z1 Entry Tower G5 can be useful for upgrading or repairing a desktop PC that is not working. As a community we are working through our specifications to add valuable data like the Z1 Entry Tower G5 boardview and Z1 Entry Tower G5 schematic. Our users have donated over 1 million documents which are being added to the site. This page will be updated soon with additional information. Alternatively you can request additional help from our users directly on the relevant badcaps forum. Please note that we offer no warranties that any specification, datasheet, or download...
                  09-12-2024, 02:20 PM
                • Document Archive
                  HP Z1 Entry Tower G5 i7-9700 Specification for Upgrade or Repair
                  by Document Archive
                  This specification for the HP Z1 Entry Tower G5 can be useful for upgrading or repairing a desktop PC that is not working. As a community we are working through our specifications to add valuable data like the Z1 Entry Tower G5 boardview and Z1 Entry Tower G5 schematic. Our users have donated over 1 million documents which are being added to the site. This page will be updated soon with additional information. Alternatively you can request additional help from our users directly on the relevant badcaps forum. Please note that we offer no warranties that any specification, datasheet, or download...
                  09-12-2024, 02:20 PM
                • Document Archive
                  HP Z1 Entry Tower G5 i7-9700 Specification for Upgrade or Repair
                  by Document Archive
                  This specification for the HP Z1 Entry Tower G5 can be useful for upgrading or repairing a desktop PC that is not working. As a community we are working through our specifications to add valuable data like the Z1 Entry Tower G5 boardview and Z1 Entry Tower G5 schematic. Our users have donated over 1 million documents which are being added to the site. This page will be updated soon with additional information. Alternatively you can request additional help from our users directly on the relevant badcaps forum. Please note that we offer no warranties that any specification, datasheet, or download...
                  09-12-2024, 02:20 PM
                • Document Archive
                  HP Z1 Entry Tower G5 i7-9700 Specification for Upgrade or Repair
                  by Document Archive
                  This specification for the HP Z1 Entry Tower G5 can be useful for upgrading or repairing a desktop PC that is not working. As a community we are working through our specifications to add valuable data like the Z1 Entry Tower G5 boardview and Z1 Entry Tower G5 schematic. Our users have donated over 1 million documents which are being added to the site. This page will be updated soon with additional information. Alternatively you can request additional help from our users directly on the relevant badcaps forum. Please note that we offer no warranties that any specification, datasheet, or download...
                  09-12-2024, 02:20 PM
                • Loading...
                • No more items.
                Working...