I have a NDIVA 1060 3GB Inno3d cart that is in a state of crashing while running, the fan is spinning at maximum speed, anyone with boardview and schematic can give it to me so I can fix it? Help me diagnose the problem so I can fix it.
-
NVIDIA GeForce GTX 1060 6GB Schematic & Board View
The GeForce GTX 1060 6 GB was a performance-segment graphics card by NVIDIA, launched on July 19th, 2016. Built on the 16 nm process, and based on the GP106 graphics processor, in its GP106-400-A1 variant, the card supports DirectX 12. This ensures that all modern games will run on GeForce GTX 1060 6 GB. The GP106 graphics processor is an average sized chip with a die area of 200 mm² and 4,400 million transistors. It features 1280 shading units, 80 texture mapping units, and 48 ROPs. NVIDIA has paired 6 GB GDDR5 memory with the... -
I’m troubleshooting an NVIDIA Quadro P2200 graphics card that isn’t recognized by Windows. I’ve discovered a missing SMD probably 180 Ω 0402 resistor on the opposite side of the PCB from the GDDR5 memory chip labeled M1.
To proceed with the repair, I’m looking for a schematic or boardview file for this card — or any other confirmation regarding proper spare parts needed.
If anyone has access to service documentation, layouts, or high-res boardview screenshots, I'd be grateful for any shared resources.... -
Hi,
I need assistance; there are knocked-off components on my GPU, which is why I'm looking for the board view and schematic of the RTX3050 Twin X2 OC Inno3D....08-23-2025, 03:32 AM -
Hello together,
i am struggeling with a Tesla P40 - i measured a short in the near of the ncp 81274 but there was no short -by mistake i desoldered 2 caps and a resistor and lost them in the 6th dimension.
Does anyone have a schematic/boardview for the P40 or show me maybe the values of the caps / resistor ncp81274 for pin 29 and 30 (FB and comp) or can i use the default Value from the NCP datasheet?
regards Juergen08-14-2025, 01:41 AM -
NVIDIA GeForce RTX 3080 / RTX 3090 Schematic & Board View
The GeForce RTX 3080 is an enthusiast-class graphics card by NVIDIA, launched on September 1st, 2020. Built on the 8 nm process, and based on the GA102 graphics processor, in its GA102-200-KD-A1 variant, the card supports DirectX 12 Ultimate. This ensures that all modern games will run on GeForce RTX 3080. Additionally, the DirectX 12 Ultimate capability guarantees support for hardware-raytracing, variable-rate shading and more, in upcoming video games. The GA102 graphics processor is a large chip with a die area of 628...